5.07.01 FLASHER ARM仿真器JTAG FOR ARM 编程器

　　Flasher ARM

　　Flash Programmer for ARM and Cortex cores

　　Flasher ARMis a programming tool for microcontrollers with on-chip or external Flash memory and ARM core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone. In addition to that Flasher ARM has all of the J-Link functionality. Flasher ARM connects via USB, Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista or Windows 7 and has a built-in 20-pin JTAG connector, which is patible with the standard 20-pin connector defined by ARM.

　　Features

　　· Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)

　　· Ethernet interface

　　· Supports internal and external flash devices

　　· Free software updates1, 2 years of support

　　· 64 MB memory for storage of target program

　　· Serial in target programming supported

　　· Data files can be updated as mass storage or via J-Flash

　　· Target interface: JTAG / SWD

　　· No power supply required, powered through USB

　　· Can be used as J-Link (JTAG emulator) with a download speed of up to 1 MByte/second

　　· Programming speed typically between 30 KBytes/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself.

　　Flasher ARM

　　Ethernet cable

　　20-pin, 0.1" target ribbon cable

　　RS232 cable 1:1 female / male

　　USB cable

　　USB power supply

　　李 进

　　深圳博瑞图电子科技有限公司

　　MOB :

　　qq : 52519094

　　ADD :深圳市福田区中航路都会轩3713

　　EMAIL :lijin810230@163.COM