FLASHPRO CC STD

　　productfeatures

　　programs chipcon mcus from texas instruments.

　　professionally made and remended by texasinstruments as third party tools.

　　up to 64 programmers can be connected overusb to one pc running windows(tm) me, 2000, xp, or 7.

　　easy to use gui allows the user to configureall necessary options with ease.

　　extensive memory options customize erase,program, and verify procedures. selected flash data can be retained acrossprogramming sequences.

fornon-arm based chipcon mcus, use flashpro-cc software.

for arm-basedchipcon mcus use flashpro-arm software.

　　128 kb flash on six mcus can beprogrammed in 4.4 seconds via jtag (cc2431f128),

　　128 kb flash on six mcus can be erased,blank checked, programmed and verified in 6.0 seconds via jtag (cc2431f128).

　　256 kb flash on six mcus beprogrammed in 4.2 seconds via jtag (cc2540f256).

　　256 kb flash on sixmcus erased, blank checked, programmed and verified in 8.1 seconds viajtag (cc2540f256).

dlland mand-line support.

　　c++ and c# code examples provided.

　　fcc and ce certified.

package contains:

　　one year warranty (see product data).

　　productdetails

　　munication:

　　usb 1.1 (12 mb/s) munication interface.

　　effective throughput via debug interface -over 25 kb/s.

　　selectable debug munication speed - 3mb/s, or 1 mb/s allows to municate with the target device even if the esdprotection ponents have been added to the debug lines.

code file:

　　no code size limitations.

　　code formats can be ti (*.txt), motorola(*.srec, *.s19, *.s28, *.s37), intel (*.hex) files for programming.

　　can bine separate code files.

dynamic link library support:

　　api-dll provided for easy integration withuser application.

　　multi-fpa dll allows control of up to 64programmers simultaneously using broadcast-style mands from one userapplication.

　　generic-fpa dll allows thread-safe control ofup to 64 programmers of any type (msp, cc, c2000, arm) using independentthreads from one user application.

　　mand-line tool allows easy programmingwith s. in addition, provided executables allow programmingadapters connected to the host puter to be controlled remotely over thenetwork.

protection:

　　lock protection bit capability.

miscellaneous:

　　user defined programming sequence uses file. no programming technique and language knowledge is required.

　　open/save project with encryption andpassword protection.

　　target device can be powered from theprogramming adapter (programmable vcc from 1.6 v to 3.7 v step 0.1 v) or fromexternal source (1.6 v to 3.7 v).

　　defined check sum calculation (sum, crc16,crc32). up to four cs banks can be specified.

　　open/save project with encryption andpassword protection.

　　lock setup capability in gui, useful inproduction.

　　unique ieee address and serial number assigncapability. software package can assign and automatically increment ieeeaddress and serial number, model type and revision. serial umber with or withoutan automatically inserted current date can be stored in the flash memory inhex, bcd or ascii format. the ieee address and serial number can be assignedfrom the user defined list in the file.

　　serial number can be read from the bar codeusing bar-code scanner and saved in the target's device flash. log file capability allowing to reviewinformation about the flashed target devices.

mcu list:

texas instruments' chipcon:

　　cc1110f8, cc1110f16,cc1110f32, cc2430f32, cc2430f64, cc2430f128, cc2431f32, cc2431f64, cc2431f128,cc2510f8, cc2510f16, cc2510f32, cc2511f8, cc2511f16, cc2511f32, cc1111f8,cc1111f16, cc1111f32, rc11xx-8kb, rc11xx-16kb, rc11xx-32kb, rc2300, cc2530f32,cc2530f64, cc2530f128, cc2530f256, cc2531f256, cc2533f32, cc2533f64, cc2533f96,cc2540f256, cc2540f128, cc2534f64, cc2541f256, cc2541f128, cc2543, cc2544,cc2545, cc8520, cc8521, cc8530, cc8531

texas instruments' chipcon cortexm3:

　　cc2538f128, cc2538f256,cc2538f512, cc2650f128, cc2640f128, cc2630f128, cc2620f128, cc1350f128,cc1330f128, cc1331f128