Pyro-Duct 597-A Electrically

　　Pyro-Duct? 597-A is an one-part, silver-filled, electrically and thermally conductive adhesive used to produce electronic and high vacuum components for applications to 1700°F (927°C). It is an advanced high temperature compound formulated using high purity silver powders combined with a proprietary inorganic binder system.

　　The electrical resistivity of the Pyro-Duct 597-A is dramatically better than conventional epoxy-based conductive adhesives that are based on non-conductive epoxy resins. It is a water-dispersible system that contains no organic resins or solvents. It sets at room temperature in 1-2 hours and heat cures in 1-2 hours at 200°F. In the uncured state, Pyro-Ducttm is easily cleaned using warm water and soap.

　　Typical applications for Pyro-Duct 597-A include sensors used in high vacuum systems, mounting single crystalline wafers for electroscopic analysis, high temperature connectors, specialty lighting, and semiconductor components.pyro- pipe?597-A是一种单组分，银填充，导电和导热粘合剂，用于生产电子和高真空组件，应用于1700°F(927°C)。它是一种先进的高温化合物，使用高纯银粉和专有的无机粘合剂体系配制而成。

　　高温管道597-A的电阻率明显优于传统的基于非导电环氧树脂的环氧基导电粘合剂。它是一种水分散系统，不含有机树脂或溶剂。在室温下1-2小时凝固，在200°F下1-2小时热固化。在未固化状态下，heat - ducttm很容易使用温水和肥皂清洁。

　　pyro-导管597-A的典型应用包括用于高真空系统的传感器，安装用于电镜分析的单晶晶圆，高温连接器，特种照明和半导体组件。