Ceramabond 835M Alumina Adhesive

　　High temperature one-part alumina-based adhesive. High strength, good filler, excellent for halogen lamps. Bonds and seals tenaciously to ceramic, metal and quartz substrates in applications up to 3000°F (1650°C).

　　Ceramabond 835M exhibits a dielectric strength of 163 volts per mil, torque strength of 63 ft-lbs, and coefficient of thermal expansion of 4.0 in/in/°F.

　　Ready following a 2 hours @ 200°F cure. Applied in a thin coat using a brush, spatula or dispenser. The clearance between mating parts at operating temperature should be 2-8 mils (50-200 microns). Blistering may occur if the glue line is too thick or heating too rapid. Environmentally safe, non-flammable material, contains no volatile organic compounds.

　　On the picture Ceramabond 835M bonds halogen bulb.高温单组分铝基胶粘剂。强度高，填料好，适用于卤素灯。在高达3000°F(1650°C)的应用环境中，可粘结和密封陶瓷，金属和石英衬底。

　　陶粒835M的介电强度为163伏/密耳，扭矩强度为63英尺-磅，热膨胀系数为4.0 in/in/°F。

　　在200°F下固化2小时即可。用刷子、抹刀或分配器将其涂在薄的涂层上。在工作温度下，配合件之间的间隙应为2-8密尔(50-200微米)。如果胶线太厚或加热过快，可能会发生起泡。环保安全，不易燃材料，不含挥发性有机化合物。

　　在图片上陶粒835M结合卤素灯泡。