Ceramabond 671 Alumina Adhesive

Ceramabond 671 Alumina Adhesive

价格 面议
起订量 10㎡
货源所属商家已经过真实性核验
品牌 AREMCO
型号 Ceramabond? 671 Alumina Adhesive
关键字
在线咨询 立即下单 留言询价 电话咨询
上海恩莱保贸易有限公司
通过真实性核验手机验证
主营:
MOLYKOTE,EVERLUBE,

进入店铺全部产品

店内推荐

联系我们

联系人:沈来春

邮箱:616787719@qq.com

电话:13301988108

地址: 上海浦东新区浦东金高路2388号813

产品详情
品牌

AREMCO

型号

Ceramabond? 671 Alumina Adhesive

  High temperature one-part alumina-based adhesive for ceramic textiles and thread-locking. Bonds and seals ceramics to ceramics, ceramics to metals and metals to metals in applications up to 3200°F (1760°C).

  Ceramabond 671 exhibits a dielectric strength of 182 volts per mil, torque strength of 57 ft-lbs, and coefficient of thermal expansion of 4.3 in/in/°F.

  Ready following a 2 hours @ 200°F cure. Applied in a thin coat using a brush, spatula or dispenser. The clearance between mating parts at operating temperature should be 2-8 mils (50-200 microns). Blistering may occur if the glue line is too thick or heating too rapid. Environmentally safe, non-flammable material, contains no volatile organic compounds.

  On the picture Ceramabond 671 bonds high temperature thread-locker.用于陶瓷纺织品和锁线的高温单组分铝基胶粘剂。在高达3200°F(1760°C)的应用中,结合和密封陶瓷到陶瓷,陶瓷到金属和金属到金属。

  陶粒671的介电强度为182伏/密耳,扭矩强度为57英尺-磅,热膨胀系数为4.3 in/in/°F。

  在200°F下固化2小时即可。用刷子、抹刀或分配器将其涂在薄的涂层上。在工作温度下,配合件之间的间隙应为2-8密尔(50-200微米)。如果胶线太厚或加热过快,可能会发生起泡。环保安全,不易燃材料,不含挥发性有机化合物。

  图片上的陶拉邦671键合高温锁线器。

售后服务

商家电话:
13301988108