Ceramabond 835MB Alumina Adhesive

　　High temperature two-parts alumina-based adhesive. High strength, good filler, excellent for halogen lamps. Bonds and seals tenaciously to ceramic, metal and quartz substrates in applications up to 3000°F (1650°C).

　　Ceramabond 835MB exhibits a dielectric strength of 202 volts per mil, torque strength of 27 ft-lbs, and coefficient of thermal expansion of 3.8 in/in/°F.

　　The product must be step cured at 200°F (93°C), 350°F (177°C), and 500°F (260°C) for 2 hours at each temperature. Applied in a thin coat using a brush, spatula or dispenser. The clearance between mating parts at operating temperature should be 2-8 mils (50-200 microns). Blistering may occur if the glue line is too thick or heating too rapid. Environmentally safe, non-flammable material, contains no volatile organic compounds.

　　高温双组分铝基胶粘剂。强度高，填料好，适用于卤素灯。在高达3000°F(1650°C)的应用环境中，可粘结和密封陶瓷，金属和石英衬底。

　　陶粒835MB的介电强度为202伏/密耳，扭矩强度为27英尺-磅，热膨胀系数为3.8 in/in/°F。

　　产品必须在200°F(93°C)， 350°F(177°C)和500°F(260°C)在每种温度下逐级固化2小时。用刷子、抹刀或分配器将其涂在薄的涂层上。在工作温度下，配合件之间的间隙应为2-8密尔(50-200微米)。如果胶线太厚或加热过快，可能会发生起泡。环保安全，不易燃材料，不含挥发性有机化合物。