Aremco-Bond 616 Electrically 耐高温胶粘剂

　　Aremco-Bond? 616 is an advanced, two-part, silver-filled, low-cost, high temperature, electrically and thermally conductive paste used for electrical and electronic assembly applications to 360°F (182°C). This system exhibits a volume resistivity of less than 0.005 ohm-cm at room temperature. The continuous operating temperature range is 360°F (180°C) and intermittent use temperature is 400°F (205°C). The tensile shear strength is 1,000 psi and Shore D hardness is 78. Mixed Viscosity range is 50,000 to 60,000 cP.

　　Aremco-Bond 616 mixes easily in a 1-to-1 ratio by weight. It sets at room temperature in 24 hours or can be heat cured in 2 hours at 100°F.

　　Typical applications include electrical connectors, lighting and sensors as a replacement for solder.

　　Aremco-Bond?616是一种先进的，两组分，银填充，低成本，高温，导电和导热糊体，用于360°F(182°C)的电气和电子组装应用。该体系在室温下的体积电阻率小于0.005欧姆-厘米。连续工作温度范围为360°F(180°C)，间歇使用温度为400°F(205°C)。抗拉剪切强度为1000 psi, Shore D硬度为78。混合粘度范围为50,000至60,000 cP。

　　Aremco-Bond 616很容易以1比1的重量比例混合。在室温下24小时内凝固，或在100°F下2小时内热固化。

　　典型的应用包括电气连接器，照明和传感器作为焊料的替代品。