西门子机架式工控机IPC RS-545A

　　西门子机架式工控机IPC RS-545A

6AG4105-6....-....SIMATIC IPC RS-545A （机架式 IPC，19"，4 个高度单位）； MB：芯片组 R680E， 3x RJ45:2x 1Gbit(IE/PN)， 1x 2.5Gbit(IE/PN)； 3x 显示器接口，1x DVI-D； 4x USB 3.2 Gen.2 A 型， 2x USB 3.2 Gen.2x2 C 型， 2x USB 2.0 A 型内部， 2x M.2 插槽，TPM2.0，音频； 7 个插槽：1x PCI， 2x PCIe x16（1x 16L 或 2x 8L）， 1x PCIe x8(4L)，3x PCIe x4(4L)， 2x USB 3.1 A 型 正面， 12x 状态 LED 正面；

　　西门子机架式工控机IPC RS-545A

　　优势坚固的设计

　　总体设计目标是在电磁干扰、震动和撞击负荷下获得安全性。良好的增压通风设备可确保即使在配置下也能承受高运行温度，另外还考虑到了防尘。

　　便于维修型设计

　　注重了使维护极其简单。PC 组件（如插槽、存储器模块）可以方便地进行插拔。风扇和风扇滤网即使在设备嵌入式安装情况下也可以方便更换，无需使用工具。

　　性能

　　由于采用一代 Intel 奔腾双核处理器到 Xeon 处理器，SIMATIC 机架式 PC 可针对特定应用灵活扩展。

　　系统可用性

　　SIMATIC Box PC 可以自定义配置进行定购，有可以供货。通过附加的数据备份选件（如 RAID1 或 RAID5 系统、冗余电源、IPC Image & Partition Creator）和高效的自诊断软件 (SIMATIC IPC DiagMonitor)，可将该设计的高系统可用性进一步扩展。

　　集成接口

　　提供了三个内置千兆以太网接口，用于办公通讯或控制级上的通信。在后面板和前面板上集成了 USB 接口，可十分方便地连接 PC 的 I/O 设备（如用于转移式数据备份的外部硬盘、操作用的键盘和/或鼠标）。针对高级图形应用，提供了一个备用 PCI Express 插槽以及一块可连接两台显示器的高性能显卡。

　　可扩展性

　　SIMATIC Rack PC 最多可有 11 个空余 PC 插槽，能够为安装在深度仅为 500mm 小型机架中的安装提供限度的扩展余地。

　　连续性

　　SIMATIC Rack PC 产品至少两年内可进行定购，主动营销期结束后至少 3 年内可提供备件。可以确保硬件和软件长期的功能性。来自英特尔嵌入式生产线的 PC 组件可长期保持供货，确保了较高投资安全性。

　　西门子机架式工控机IPC RS-545A

　　优势

　　Maximum system performance for complex automation and visualization tasks

　　Intel® processors of the 12th generation (Intel-Alder-Lake) with performance cores (P cores):

　　Core i5, i3 with up to 6 cores/12 threads

　　Intel® chip set: R680E

　　Intel® UHD graphics controller integrated in processor, with up to 4K Ultra HD resolution for extraordinary graphics performance

　　Main memory configuration: DDR5-4400 from 8 GB up to 128 GB, configured as dual channel for maximum performance

　　High data transfer rates (e.g. M.2 NVMe SSD, PCI Express technology Gen. 4, USB 3.1 Gen. 2)

　　Two Intel Gigabit ports and one 2.5 Gigabit Ethernet port onboard

　　Three DisplayPorts V1.4a and DVI-D onboard

　　Modern hard disks with up to 4 TB capacity for storage of larger data volumes and improved reliability

　　Solid-state drive with up to 960 GB as fast hard disk replacement for increased data security

　　Minimization of downtimes due to high system availability and safety

　　Reliable 24-hour operation (high MTBF, variable-speed fan)

　　RAID1 configuration: Data mirroring on two drives (HDD or SSD), including in hot swap removable trays and with additional SSD option (for operating system), or hot spare hard disk

　　RAID5 configuration: Striping with parity on three hard disk drives (HDD) for increased memory capacity in hot swap removable frames, with additional hot spare hard disk option

　　"Hot swap" HDD in RAID configurations (replacement of hard disk during operation)

　　"Hot spare" HDD in RAID configurations (rebuild process on "hot spare" hard disk starts up automatically)

　　3.5" HDD-Enterprise or 2.5" SSD and M.2 SSD as RAID configurations

　　Fast identification and replacement of the hard disk in the event of a fault by means of HDD alarm LEDs for RAID configurations and unambiguous numbering

　　Status display (front LEDs) for Ethernet; alarm display for fan, temperature, and drives in RAID1 configurations

　　Redundant AC power supply unit with "hot swap" functionality (replacement of power supply module during operation), optional

　　Access protection for removable trays at the front, operator controls (power, reset), USB interfaces, dust filter and front fan via locked fan cover and lockable front door

　　Enclosure cover can only be opened when the front door is open

　　Secured up to two internal USB slots in the device for e.g. software dongle

　　TPM 2.0 module - onboard security hardware (Trusted Platform Module)