德国Mahr马尔轮廓粗糙度仪一体机UD 130 马尔粗糙度仪 马尔轮廓仪 代理商

德国Mahr马尔轮廓粗糙度仪一体机UD 130 马尔粗糙度仪 马尔轮廓仪 代理商

马尔轮廓粗糙度仪一体机MarSurf UD 130 | Art.-Nr. 6720823

　　定位速度 0.1 mm/s 至 30 mm/s

　　扫描长度末尾（X 方向） 130 mm

　　测量速度 0.1 mm/s 至 5 mm/s；

　　用于粗糙度测量

　　建议 0.1 mm/s 至 0.5 mm/s

　　分辨率 2 nm

　　测头 标准测头 LP-D 14-10-2/60 度

　　测量范围 mm

　　10 mm（100 mm 测杆）

　　20 mm（200 mm 测杆）

　　轮廓分辨率 2 nm

　　扫描长度 0.1 mm 至 130 mm

　　测量力 (N) 1 mN 至 30 mN，可软件调整

　　With the MarSurf UD 130, Mahr has created the successor to the

　　successful MarSurf UD 120 and closes the gap between the highend solution MarSurf LD 130 / LD 260 and the standard combination measuring station MarSurf XCR 20 with two drive units.

　　The technical data of the MarSurf UD 130 have been decisively

　　improved, especially the measuring and positioning speeds enable

　　the reduction of the measuring times per workpiece.

　　Different probe arms and probe tip geometries are available for

　　different measuring tasks. Depending upon the measuring tasks,

　　diamond tips with 2 μm and 5 μm radius can be used for roughness measurements, carbide tips with 25 μm for contour measurements or ruby balls.

　　The MarSurf UD 130 and the MarSurf LD 130 / LD 260 enable

　　high-precision measurements in the nm range.

　　Patented solutions, such as the probe arm changing unit make

　　these measuring stations also suitable for automated measuring

　　operations.

　　Roughness and contour in one measurement

　　You only need a fraction of the time and yet you measure faster,

　　more precisely and more efficiently.

　　After only one measurement, you have all the results of the

　　roughess and contour analysis at your finger tips.

　　More time for other tasks!

　　The most modern measuring technology for small tolerances enables a high, constant accuracy over a large measuring

　　range with high resolution.

　　High measuring and positioning speed greatly minimize

　　the measuring times

　　Positioning speed up to 30 mm/s

　　Measuring speed up to 5 mm/s

　　Innovative probe arm solution

　　Bionic design of the probe arms and new materials ensure higher

　　rigidty, reduced vibration behavior, higher dynamics.

　　Faster and safer exchange of the probe arms with simultaneous probe arm recognition through magnetic holder and

　　reliable recognition due to the chip in the probe arm.

　　Service-friendly thanks to modular concept

　　Maintenance without complete disassembly of the measurng

　　stand possible.