联系人：陈经理
邮箱：info@f-lab.cn
电话：13820163359
地址： 上海浦东新区上海自由贸易试验区德堡路38号2幢楼三层
| 型号 |
FPINTE-0450L-34A |
运转方式 |
连续式 |
| 激励方式 |
电激励式 |
波段范围 |
近紫外 |
| 光路径 |
内光路 |
传输信号 |
单电源型 |
| 速度 |
低速 |
输出波长 |
450 |
| 产地 |
www.felles.cn/445nm.html |
厂家 |
www.felles.cn/445nm.html |
多模光纤耦合450nm激光器是一款为荧光成像应用而设计的连续半导体450nm激光器,采用多模激光二极管和多模光纤配置,具有良好的450nm激光器价格。
多模光纤耦合450nm激光器采用高功率多模激光二极管输出激光,非常适合流式细胞激光,荧光成像,荧光激发,生物医学应用
多模光纤耦合450nm激光器应用
流式细胞仪
荧光成像
荧光激发
生物医学
多模光纤耦合450nm激光器规格参数
| Parameter | Minimum Value | Typical Value | Maximum Value |
|---|---|---|---|
| Central Wavelength, nm | 440 | 450 | 460 |
| Longitudinal modes | - | multiple | - |
| Spectral line width FWHM, nm | - | 1 | 2 |
| Output power, mW | - | 600 1 | - |
| Power stability, % (RMS, 8 hrs) | - | 1 2 | 2 |
| Power stability, % (peak-to-peak, 8 hrs) | - | 2 3 | 3 |
| Noise, % (RMS, 20 Hz to 20 MHz) | - | 0.4 4 | 1 |
| Transversal modes | - | Multiple | - |
| Control interface type | - | UART/USB | - |
| Operation mode | - | APC (CW) | - |
| Modulation bandwidth, MHz | - | on request | - |
| Input voltage, VDC | 4.8 | 5 | 5.3 |
| External power supply requirement | - | +5 V DC, 2 A | - |
| Dimensions, mm | - | 50 x 30 x 16 5 | - |
| Heat-sinking requirement, °C/W | - | 0.5 | - |
| Optimum heatsink temperature, °C | 15 | 20 | 30 |
| Warm up time, mins (cold start) | 0.1 | 0.5 | 1 |
| Temperature stabilization | - | Yes | - |
| Overheat protection | - | Yes | - |
| Storage temperature, °C (non-condensing) | -10 | - | 50 |
| Net weight, kg | 0.1 | 0.12 | 0.14 |
| Max. power consumption, W | 5 | 10 | 20 |
| Warranty, months (op. hrs) | - | 14 (10000) 6 | - |
| RoHS | - | Yes | - |
| CE compliance | - | - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC
| - |
| Laser Safety Class | - | 3B | - |
| OEM lasers are not compliant with | - | IEC60825-1:2014 (compliant using additional accessories) |
13820163359