联系人：陈经理
邮箱：info@f-lab.cn
电话：13820163359
地址： 上海浦东新区上海自由贸易试验区德堡路38号2幢楼三层
| 型号 |
FP1029NM |
运转方式 |
重复脉冲式 |
| 激励方式 |
电激励式 |
波段范围 |
近红外 |
| 输出波长 |
1030 |
产地 |
www.felles.cn/1030nm.html |
| 厂家 |
www.felles.cn/1030nm.html |
|
1029nm纳秒单频激光器是一款单纵模1029nm激光器,具有极高的脉冲-脉冲稳定性,非常适合泵浦探针光谱,照明和分选应用。
1029nm纳秒单频激光器应用
高功率光纤激光器种子
光学参量放大器种子注入
超连续光产生
紫外激光
1029nm纳秒单频激光器规格参数
| Parameter | Minimum Value | Typical Value | Maximum Value |
|---|---|---|---|
| Central Wavelength, nm | 1029 | 1029.5 | 1030 |
| Longitudinal modes | - | single | - |
| Spectral line width FWHM, pm | 0.5 | 0.8 1 | 1 |
| Output power, mW | - | As per request | 300 |
| Central wavelength stability, pm (per hour, at stable body temperature) | - | 1 | 2 |
| Pulse duration, ns | 1.5 | 3 | 10 |
| Repetition rate, kHz (depending on pulse energy) | - | As per request | 35 |
| Pulse energy, μJ | - | As per request | 35 |
| Power stability, % (RMS, 8 hrs) | - | 0.5 2 | 1 |
| Pulse-to-pulse stability, % RMS | - | 2 | 5 |
| Transversal modes | - | TEM00 | - |
| Beam Diameter at Aperture (1/e2), mm | - | 1 | - |
| Beam divergence (full angle), mrad | - | 1 | 1.1 |
| M2 effective | - | 1.1 | 1.2 |
| Polarization direction | - | Horizontal 3 | - |
| Polarization contrast | - | better than 500:1 | - |
| Control interface type | - | UART/USB | - |
| Operation mode | - | APC (CW) | - |
| Input voltage, VDC | - | 5 | - |
| External power supply requirement | - | +5 V DC, 5A | - |
| Dimensions (L-W-H), mm | - | 50 x 30 x 16 4 | - |
| Beam height from the base, mm | - | 10.4 | - |
| Heat-sinking requirement, °C/W | - | <0.5 | - |
| Optimum heatsink temperature, °C | - | 20 | - |
| Warm up time, mins (cold start) | - | 10 | - |
| Temperature stabilization | - | Yes | - |
| Overheat protection | - | Yes | - |
| Storage temperature, °C (non-condensing) | - | - | - |
| Net weight, kg | - | 0.29 | - |
| Max. power consumption, W | - | 14 (10000) | - |
| Warranty, months (op. hrs) | - | 14 (10000) 5 | - |
| RoHS | - | Yes | - |
| CE compliance | - | - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC
| - |
| Laser Safety Class | - | 3B | - |
| OEM lasers are not compliant with | - | IEC60825-1:2014 (compliant using additional accessories) |
13820163359