胶水网带复合机 立式网带复合机

　　复合机就是将两层或者两层以上的材料用粘合剂粘合在一块。如薄膜和布纤或者玻璃布就经常会用到。可和纸张，胶片、海绵、布料等复合。

　　用途与特点：

　　放料：采用磁粉张力、气涨轴放卷 上胶：根据胶型不同，所选择的机器上胶装置也不同。油性胶用刮刀；油胶与水胶两用型的，采用逗型刀

　　烘箱：长度根据产量大小而定。采用电加热管加热

　　传动：采用调速电机

　　收卷：摩擦片收卷、磁粉张力气涨轴中心收卷（可选）

　　 立式网带复合机

　　用途：用于羊羔绒、摇粒线、长毛绒、鸡皮绒、海绵、布类、EVA、人革、人造棉等上胶贴合。服装、制鞋、制帽、手套、皮衣、汽车垫、玩具等原料上胶巾贴合。

　　复合范围：海绵、布类、人革、无纺布、EVA等加厚材料需要双烘筒再次加温的复合。

　　主要配置：

　　1放料装置：机架、导布辊.、大力拑。

　　2.上胶装置：胶辊花纹精密细致，用不锈钢刮刀，耐磨耐用，刮胶均匀。

　　3.牵引装置：动力牵引。

　　4.烘筒压合：烘筒内装有电机热管30根，预热时间短，烘筒内加装灌装导热油，使两端与表面温度基本 保持一致。需加价1.5左右

　　5.传动部分：采用国产变频器调速电机，变频联动，机器同步运转平稳。

　　6.切边装置：在复合后材料收卷前切边，加价8000，装有调整手柄易于操作，切边时不卡滞，废料能顺利落地。

　　7.收卷装置：采用磁粉张力气涨轴中心收卷，加价5000，并采用液压自动对边，卷布效果好。准确方便。加价8000，

　　主要技术参数：

　　有效幅宽 1600

　　烘筒规格 ￠1500×1800

　　加热功率 45kw

　　传动功率3+2.2+1+1.5kw

　　复合速度 0-45米／min

　　机器总长6.8m

　　免费安装调试，保修一年。

　　The composite is to glue two or more layers of material with adhesive in one piece. Such as thin film and cloth fiber or glass cloth will often be used. It can be combined with paper, film, sponge, cloth and so on.

　　Use and characteristics:

　　Discharge material: use magnetic powder tension and air rise axis to roll up the glue. According to the different glue type, the machine on which the machine is selected is different. Oil adhesive scraper; double use of oil glue and water glue, use comma knife

　　Oven: the length depends on the size of the output. Heating with electric heating tube

　　Drive: adopt the speed regulating motor

　　Reel: reel of frictional sheet, magnetic powder tension shaft center reel (optional)

　　Vertical mesh belt composite machine

　　Use: for lambs, shakes, cashmere, chicken skin, sponges, cloth, EVA, human leather, artificial cotton and so on. Clothing, shoes, hats, gloves, leather, car cushion, toy materials such as towel on joint.

　　Compound range: the thickening material such as sponge, cloth, human leather, non-woven fabric, EVA and so on needs the compound of double drying cylinder to be heated again.

　　Main configuration:

　　1 feeding device: frame, guide roller, strong claws.

　　Glue device 2.: roller pattern precision meticulous, with stainless steel scraper, durable, uniform frictioning.

　　3. traction device: power traction.

　　4. drying tube pressing: the oven is equipped with 30 heat pipes with electric motor, and the heating time is short. The heat transfer oil is installed in the oven to keep the temperature of the two ends and the surface temperature basically consistent. It needs to be priced at about 1.5

　　5. transmission part: using domestic frequency converter motor, frequency conversion linkage, machine synchronous operation smooth.

　　6. cutting edge device: cut the edge before the composite material is reel, the price is 8000, the adjustment handle is easy to operate, the cutting edge is not stagnant, the waste can be landed smoothly.

　　7. winding device: a magnetic sheet strength center shaft winding up, increase 5000, and the use of hydraulic automatic edge rolling, good effect. It is accurate and convenient. The price is 8000,

　　Main technical parameters:

　　Effective width 1600

　　Specification of drying cylinder 1500 x 1800

　　Heating power 45KW

　　Transmission power 3+2.2+1+1.5kw

　　Compound speed of 0-45 M / min

　　Machine head 6.8m

　　Free installation and commissioning, warranty for one year.