特高温合成润滑脂,型号:SK2401 SK2402 SK2403 SK2 SK3

特高温合成润滑脂,型号:SK2401 SK2402 SK2403 SK2 SK3

价格 面议
起订量 10㎡
货源所属商家已经过真实性核验
品牌 玖城
型号 SK2401 SK2402 SK2403 SK2 SK3
关键字
在线咨询 立即下单 留言询价 电话咨询
苏州铭宏润滑油脂科技有限公司
通过真实性核验手机验证
主营:
苏州润滑油|苏州液压油|苏州导热油|苏州导轨油

进入店铺全部产品

店内推荐

联系我们

联系人:张小姐

邮箱:suzmh@sina.com

电话:13451662816

地址: 江苏苏州市吴中区天鹅荡路2号B1栋

产品详情

  玖城牌特高温合成润滑脂

  产品型号:sk2401 sk2402 sk2403 sk2 sk3

  产品描述:玖城牌特高温合成润滑脂采用无机稠化剂稠化合成油,添加防锈剂、极压添加剂和结构改善剂等精制而成。

  产品特点:

  优秀的高温耐久性,在高温下具有较长的使用寿命,适合于持续高温作业环境。

  具有良好的低温性能,在低温工况下能保持柔软细腻的质地,不会冻结硬化。

  良好的极压性能,满足高温环境下中重负荷机械设备的润滑。

  优秀的机械安定性、防锈性、抗水淋和保护性能。

  产品应用:

  用于高温重负荷工况条件下各种滚动轴承的润滑。

  用于连轧机及其它高温、重负荷设备的摩擦部位的轴承润滑。

  用于烤箱链条,烤漆、喷涂线、干燥箱的高温链条、轴承、齿轮、轨道的润滑与防护。

  使用温度:-40℃~600℃

  jc super high temperature synthetic grease

  product number:sk2401 sk2402 sk2403 sk2 sk3

  product deion:

  jc super high temperature synthetic grease is manufactured with inorganic thickener to thickened synthetic oil,and add rust inhibitors, extreme pressure additives, and structural modifiers and so on refined but become.

  performance characteristics:

  with excellent high temperature durability, long life at high temperature, suitable for continuous high temperature operating environment.

  with good low temperature performance, it can maintain soft and fine texture at low temperature and will not freeze hardening.

  with excellent extreme pressure performance, to meet the lubrication of medium and heavy load mechanical equipment in high temperature environment.

  with excellent mechanical stability, rust resistance, water resistance and protection.

  recommended use:

  used for lubrication of various rolling bearings under high temperature and heavy load conditions.

  used for lubricate the bearings in the friction parts of continuous rolling mills and other high-temperature and heavy-load equipment.

  used for lubrication and protection of high-temperature chains, bearings, gears and tracks of oven chains, paints, spray lines and drying ovens.

  temperature range:-40℃ to 600℃

  玖城牌高温润滑脂的典型数据typical data of jc high temperature grease:

  项目project

  

  典型数据typical data

  

  外观 appearance

  

  黑色光滑均匀油膏

  

  工作锥入度/0.1mm 60次 penetration 1/10mm 60 times

  

  220-265

  

  滴点,℃ drop point,℃

  

  350

  

  铜片腐蚀(t2.100℃.24h) copper corrosion(t2.100℃.24h)

  

  合格pass

  

  水淋流失量(79℃,1h)% sprinkling loss(79℃,1h)%

  

  1.5

  

  钢网分油(100℃,24h)% steel mesh oil filtering(100℃,24h)%

  

  1.9

  

  防腐蚀性(52℃,48h) corrosion resistance(52℃,48h)

  

  合格 pass

  

  极压性能(四球机法)pa/kg extreme pressure performance (4-ball test)pa/kg

  

  544

  

  蒸发度(120℃,m/m)% evaporativity(120℃,m/m)%

  

  ≤1.2

  

  适用工作温度℃ applicable working temperature ℃

  

  -40--+600

  

售后服务

商家电话:
13451662816