HIMA F-CPU 01

　　The F-CPU 01 processor module is intended for use in the programmable electronic system (PES) HIQuad X.

　　The processor module is used for:

　　? Processing up to 32 user programs

　　? Performing all central functions including system bus communication.

　　? Handling redundancy with an additional processor module.

　　? Handling communication via safeethernet.

　　? Creating and storing CPU and I/O events.

　　? Managing the system bus connections to the I/O processing modules (F-IOP 01).

　　? Managing the system ID.

　　? Providing the interface to the programming and debugging tool (PADT).

　　A maximum of two processor modules may be inserted in the base rack. The permitted slots are specified in Chapter 4.1.1.

　　If the base rack contains one processor module, the HIQuad X system only operates with one system bus (mono operation). If two processor modules are used, the HIQuad X system operates with redundant system bus A and system bus B (redundancy operation).

　　HIMA recommends using redundancy operation (default) to exploit the high availability of the HIQuad X system.

　　The module has been certified by the TüV for safety-related applications up to SIL 3 (IEC 61508, IEC 61511, IEC 62061 and EN 50156) as well as Cat. 4 and PL e (EN ISO 13849-1).

　　Refer to the HIMA website and the HIQuad X safety manual (HI 803 209 E) for more information on the standards used to test and certify the module and the HIQuad X system.