联系人：张经理
邮箱：298936165@qq.com
电话：18192873687
地址： 中国 陕西 西安市西安高新区电子四路生产力大厦A区
MIL-STD-461 CS106, CS114, CS115, CS116
CS106 is applicable to submarine and surface ship equipment and subsystem AC and DC input power leads. The generator delivers a transient pulse in the microsecond range, with repetition up to 15 pulses per second.
CS114 is a swept bulk cable injection which simulates currents that will be developed on platform cabling from electromagnetic fields generated by antenna transmissions.
CS115 uses a fast trapezoidal pulse to excite natural resonances associated with cables. The basic concern is to protect equipment from fast rise and fall time transients that may be present due to platform switching operations and external transient environments such as lightning and electromagnetic pulses.
CS116 defines damped sinusoid transients at several fixed frequencies to simulate electrical current and voltage waveforms occurring in platforms from excitation of natural resonances.
Montena has developed a software controlled test bench covering all these test requirements. Thanks to a high frequency switching module, the calibration and measurement phases can be performed without changing any cabling of the test system. Montena proposes up to 17 frequencies for the CS116 test, enhancing the frequency coverage and test results.
Advantages
Single generator output for CS114, CS115 and CS116 tests allowing remote test automation
Automatic calibration for each test and for the full test frequency range
Automatic configuration of the measurement equipment settings
Built-in scroll-down menus for selecting test equipment and components
Test and calibration reports automatically generated
|
| EQUIPMENT | REFERENCE | SPECIFICATIONS |
| Signal injection | Pulse generator | PG-CS106 | 400V peak, 1.5 μs rise time, transient for CS106 |
| Pulse generator (module) | M-CS106 | 400V peak, 1.5 μs rise time, transient for CS106 | |
| Active injection probe | IC10M | 100 A, for CS106, to be used with PG-CS106 or M-CS106 | |
| Power amplifier | PA400M70W | 70 W, 10 kHz - 250 MHz, for CS114 | |
| Pulse generator for CS115 and CS116 | POG-CS116+
M-CS115
| Pulse generator with 6, 9, 17 frequencies for CS116 and module for CS115 | |
| High frequency injection probe | IPDR250 | 10 kHz to 400 MHz, for CS114, 115 and 116 | |
| Test accessories | Coaxial dummy load | PCL1G-400 | 50 ? load for system calibration |
| Attenuators | PATP20-100, PATP40-100 | 20 and 40 dB attenuators for system calibration | |
| LISN | LISN50-25 | Line impedance stabilization network, 50 μH, 20 A | |
| Measurement equipment | Current / voltage sensor |
| Set of current and voltage probes |
| Oscilloscope | OD2C600M | 600 MHz bandwidth, 10 Gs/s, 2 channels | |
| Software |
|
Automatic calibration, configuration, test and report
|
18192873687