| 品牌 |
乐泰 |
型号 |
乐泰496 |
| 产品名称 |
瞬间胶 |
硬化/固化方式 |
湿固化胶粘剂 |
| 主要粘料类型 |
合成弹性体 |
基材 |
透明无机材料 |
| 物理形态 |
乳液型 |
性能特点 |
快速固化 |
| 产地 |
中国 |
厂家 |
汉高股份有限公司 |
| 粘合材料类型:金属类,其他材质,其他 | 树脂胶的分类:氰基丙烯酸甲酯 |
| 剪切强度:25（MPa） | 有效物质≥:100（％） |
| 工作温度:25（℃） | 保质期:21（个月） |
| 执行标准:COC | CAS:NA |
| 典型黏度:125（cps） | 完全固化时间:24（h） |
具体价格请来电洽谈
乐泰胶水496
包装规格：20g瓶装
主要粘贴材料：金属，塑料，橡胶
颜色：无色
类型：甲基
粘度：100/150
固化速度：30秒/24小时
剪切强度：20/30
相对密度：1.1
Remove affected person to fresh air, and if still feeling unwell seek medical attention.
First Aid - Skin
Do not pull bonded skin apart. It may be gently peeled apart using a blunt object such as a spoon,preferably after soaking in warm soapy water. Cyanoacrylates give off heat on solidification。
In rarecases a large drop will generate enough heat to cause a burn. Burns should be treated normally
and pressure from saliva inside the mouth. Peel or roll lips apart. Do not try to pull the lips apart
with direct opposing action.
First Aid - Eyes
If the eye is bonded closed, release eyelashes with warm water by covering with wet pad.
Cyanoacrylate will bond to eye protein causing lachrymatory effect which will help to debond
adhesive. Keep eye covered until debonding is complete, usually within 1-3 days. Do not force eye
open. Medical advice should be sought in case solid particles of cyanoacrylate trapped behind the
eyelid cause any abrasive damage.
5. FIRE FIGHTING MEASURES
on incineration and the use of breathing apparatus is recommended.
6. ACCIDENTAL RELEASE MEASURES
Ventilate area. Do not use cloths for mopping up. Polymerise with water and scrape off floor.
7. HANDLING AND STORAGE
Handling
Ventilation (low level) is recommended when using large volumes. Use of dispensing equipment is
recommended to minimise the risk of skin or eye contact.
Storage
For optimum shelf life store in original containers under refrigerated conditions at 2°C to 8°C.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Occupational exposure limits
Methyl Cyanoacrylate HSA (1999) C.O.P : OEL 2ppm (8mg/m3) 8h TWA.
HSA (1999) C.O.P : OEL 4ppm (16mg/m3) 15 min
exposure limit.
ACGIH: TLV 0.2ppm 8h TWA.
Polyethylene or polypropylene gloves are recommended when using large volumes. Do not use
PVC, rubber, nylon or cotton gloves. Eye protection should be used where there is any risk of
splashing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State Liquid.
Colour Clear Colourless.
Odour Sharp. Characteristic.
pH Not applicable.
Boiling Range/Point (°C) Boils above 100.
Flash Point (CC) (°C) Exceeds 80.
Specific Gravity 1.1 at 20 °C.
Solubility in Water (kg/m3) Immiscible.
Solubility in Acetone Not applicable.
Vapour Pressure (mmHg
@25°C)
Less than 0.5 at 25 °C.
Explosion Limits (%) Not determined.
10. STABILITY AND REACTIVITY
Polymerisation will occur in the presence of moisture.
11. TOXLOGICAL INFORMATION
Inhalation
Irritating to respiratory system. In dry atmosphere with < 50% humidity, vapours may irritate the
eyes and respiratory system. Prolonged exposure to high concentrations of vapours may lead to
chronic effects in sensitive individuals.
Skin
This product is classified as a skin irritant. Bonds skin in seconds. Considered to be of low11. TOXLOGICAL INFORMATION
toxicity: acute dermal LD50 (rabbit)>2000mg/kg. Due to polymerisation at the skin surface
allergic reaction is not considered possible.
Eyes
This product is an irritant to the eyes. Liquid product will bond eyelids. In a dry atmosphere
(RH<50%) vapours may cause irritation and lachrymatory effect.
Ingestion
Cyanoacrylates are considered to have relatively low toxicity. Acute oral LD50 is >5000mg/kg (rat).
It is almost impossible to swallow as it rapidly polymerises in the mouth.
优势方面
我们只提供原装汉高乐泰、道康宁、3M、迈图等产品，我们为广大客户朋友提供具有竞争优势的价格。
我们是胶粘剂及施胶设备整体解决方案供应商，我们不止卖产品，我们更为客户提供全面而的售前指导和售后服务工作，直至广大客户的项目正常运转！
欲知更多产品详情，欢迎咨询深圳市鹏科泰贸易有限公司
Non flammable product (flash point is greater than 80°C (CC)). If product is involved in fire
extinguish with dry powder, foam or carbon dioxide. Trace amounts of toxic fumes may be released
13925200833