| 品牌 |
乐泰 |
型号 |
乐泰4014 |
| 硬化/固化方式 |
湿固化胶粘剂 |
主要粘料类型 |
合成热固性材料 |
| 基材 |
透明无机材料 |
物理形态 |
无溶剂型 |
| 粘合材料类型:塑料类,金属类,其他 | 树脂胶的分类:丙烯酸酯胶 |
| 热熔胶类型:家具热熔胶 | 剪切强度:1200（MPa） |
| 有效物质≥:90（％） | 活性使用期:5（min） |
| 工作温度:65（℃） | 保质期:24（个月） |
| 执行标准:COC | CAS:SGS |
| 典型黏度:3（cps） | 完全固化时间:24（h） |
乐泰4014 瞬干胶
基本性能
外观透明度/颜色：清澈
固化类型：湿气固化
适用基材：热塑性塑料，热固塑料，金属
粘度：3
温度范围：-53°C到104°C
LOCTITE® 4014? is designed to provide fast room
temperature fixturing and is also suitable for applications where
heat resistance is required. Suitable for use in the assembly of
disposable medical devices.
ISO-10993
An ISO 10993 Test Protocol is an integral part of the Quality
Program for LOCTITE® 4014?. LOCTITE® 4014? has
been qualified to Loctite's ISO 10993 Protocol as a means to
assist in the selection of products for use in the medical device
industry.
Cure Speed vs. Bond Gap & Humidity
The rate of cure will depend on the bondline gap. Thin bond
lines result in high cure speeds, increasing the bond gap will
decrease the rate of cure. The rate of cure is also influenced
by the ambient relative humidity; the higher the relative
humidity, the greater the cure speed.
Cure Speed vs. Activator
Where cure speed is unacceptably long due to large gaps,
applying activator to the surface will improve cure speed.
However, this can reduce ultimate strength of the bond and
therefore testing is recommended to confirm effect.
TYPICAL PROPERTIES OF CURED MATERIAL
Cured for 24 hours @ 22 °C
Physical Properties:
Shore Hardness, ISO 868 65
Elongation, ISO 527-2, % 2
Tensile Strength, ISO 527-3 28
(4,000)
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or
greater than 8 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials.
更多产品详情，可咨询深圳市鹏科泰贸易有限公司
13925200833