联系人：王世维
邮箱：Lucas@aetcl.com
电话：13825761636
地址： 广东东莞市长安镇东莞市长安镇新安社区嘉美路旭联商务大厦805室
Features
With standard IC and common lead dimensions (2.54mm pitch x 7.26 mm), the KDS Series switches support serial mounting on IC-pitch printed circuit boards.
What's more, this design also facilitates consolidation with other electronic components so that high-density packing may be realized.
Mounting efficiency has been further enhanced through the rounding of tail tips.
Kinked tails hold switch to PC board during soldering
In addition to binary-decimal and binary-hexadecimal circuit configurations (each supporting either real or complement code), the connectors of the KDS Series features four different types of control section shape for wide-ranging applications.
Flat type: Operated using the tip of a screwdriver (of 3mm width)
Indicator type: In addition to supporting operation by a screwdriver, this switch`s right-angle design also facilitates operation from the side.
Knob type: Supports operation by hand.
Shaft type: Operated using the tip of a screwdriver (of 3 to 5mm width); furthermore, the panel surface and control section can also be arranged in parallel.
RoHS compliance
Specifications
| Current rating and voltage | Non switching 125mA, 30V DC Switching 125mA, 30V DC |
| Contact resistance | 100mΩ max. |
| Dielectric withstanding voltage | 250V AC for 1 minute |
| Insulation resistance | 1,000MΩ min. at 250V DC |
| Durability | 20,000 actuations |
| Position | 10 and 16 |
| Material | Insulator: Glass-filled polyamide
Rotor control: Polyacetal Contact: Copper alloy Rotor switch element: Glass epoxy, gold plating over nickel O-ring: Fluoro-rubber |
| Operating Temperature | -25°C to +85°C |
日本原装进口精密开关
*KDS系列型號代碼
13825761636