联系人：侯经理
邮箱：czzoty@163.com
电话：15061122566
地址： 中国 江苏 常州市钟楼经济开发区
WEIGHT :32KILOSEMPTY
DIMENSIONS :490×430×480
OUTPUT PRESSURE :MAX.350MPa 7.0 BAR AIR INPUT
OUTPUT PRESSURE :MAX.300MPa 6.0 BAR AIR INPUT
PUMPING SPEED :APPROX.400CYCLES/MIN.
AT7.0 BAR AIR INPUT
TANK CAPACITY :APPROX8LITRES
MAX.FLOWAT NO PRESSURE :APPROX.0.35m 2/MIN AT7.0 BAR AIR INPUT
重量 ：32㎏
尺寸 ：490×430×480毫米
输出油压 ：350MPa（输入空气压力0.7MPa）
输出油压 ：300MPa（输入空气压力0.6MPa）
泵工作速度 ：约400次循环/每分钟，输入压力0.7MPa
油箱容量 ：约8升
流量在没有压力 ：约0.35 m2/每分钟，输入压力0.7MPa
PRELIMINARY
Operating instruotion
For
Pump unit Type PP
This instruction been made to facilitate the understand of the working princiPles of the pump unit.
The various control instruments and maneuvering handles are fitted with a number.These numbers are mentioned in this instruction and also referring to the numbers found on the drawings showing the complete pump unit.
Furthermore,these numbers are found on the instrument panel of the pump unit.
Please,read this instruction of use carefully before using the pump unit and follow the instructions given very carefully.
BERORECONNECTINGTHEPUMPUNIT：
The tank is filled with oil teough the filler cap in the right side of the top panel.
OIL:Anygood hydraulic oil may be used.
a) Open oil return valve by truning anti-clockwise.
b) The handle of the regulator valve should be turned 4-5 turns anti-clockwise.This is done to avoid the pump starting at a too high pressure level.
c) Stop-valve should be turned clockwise,to close the valve.This is done to ensure that the pump will not work at will when the primary pneumatic syatem is connected.
CONNECTION OF PUMP:
Compressed air is led through a flexible hose and is connected to the stud marked“airinlet”
以上说明节选自《PP-350型气动液压泵产品说明书》，详询常州卓泰液压
15061122566