IC698CRE020 GE Fanuc CPU中央处理器
IC698CRE020 GE Fanuc CPU中央处理器

IC698CRE020 GE Fanuc CPU中央处理器

价格 12,500.00
起订量 10㎡
货源所属商家已经过真实性核验
品牌 GE发那科
型号 IC698CRE020
关键字
在线咨询 立即下单 留言询价 电话咨询
厦门雄霸电子商务有限公司
通过真实性核验手机验证
主营:
PLC DCS自动化备件ABB GE 本特利 英维思 艾默生 黑马HIMA

进入店铺全部产品

店内推荐

联系我们

联系人:赖志平

邮箱:

电话:18664396232

地址: 福建厦门市思明区厦门市思明区吕岭路1733号创想中心2009-2010单元

产品详情
品牌

GE发那科

型号

IC698CRE020

类型

Genius总线控制器

性能

良好

适用范围

高压系统

加工定制

串行端口

1(手持监视器端口)

系列

90-70系列

所需电流

背板1.3安培

背板电压

5伏DC

位置

RX3i串行扩展底板和90-30系列扩展底板

支持的通信

数据报和全局数据通信

最大支持设备数

总线上有32个设备

波特率

153.6、38.4或6.8千波特

IC698CRE020是一个700 MHz的中央处理器,配有英特尔奔腾III微处理器 由GE Fanuc为RX7i系列制造。该CPU配备有 热备用冗余允许关键应用程序在任何单个组件出现故障时继续运行。热备用系统使用两个CPU。一个CPU是主动控制进程的活动单元,另一个是与活动单元同步的备份单元,可以在必要时接管进程。 为了实现冗余,IC698CRE020需要一个冗余内存交换模块(RMX)目录为IC698RMX016。它通常被配置为每个单元中的冗余链路。

  IC698CRE020与任何其他RX7i CPU一样,安装有配置为启动和完成特定任务的软件程序。这些任务包括以实时模式控制设备、维护一般机器流程以及处理材料应用。的附加功能IC698CRE020包括10MBs的电池后备存储器和非易失性闪存、对大容量存储器的访问以及用户可配置的数据和程序存储器。自动定位符号变量与90-70系列离散和模拟I/O一样受支持。该CPU还支持90-70系列VME模块。为了避免丢失CPU RAM的可能性,建议保持一个例行程序,包括在适当的时候更换电池组。电池负责日历时钟、数据存储器和程序等操作在断电期间的整体稳定性。

处理速度:700兆赫
CPU内存:10兆字节
浮点:
串行端口:3
串行协议:Modbus RTU从机,SNP,串行I/O
嵌入式通信:RS-232,RS-486。以太网接口

  The IC698CRE020 is a 700 MHz Central Processing Unit with an Intel Pentium III microprocessor manufactured by GE Fanuc for the RX7i Series. This CPU is equipped with Hot Standby Redundancy to allow critical applications to continue operating in case of failure in any single component. A Hot Standby system uses two CPUs. One CPU is the active unit that aggressively controls the process, and the other is a backup unit that is synchronized with the active unit and can take over the process when necessary. To accomplish redundancy, the IC698CRE020 requires a Redundancy Memory Xchange module (RMX) catalogued as IC698RMX016. It is normally configured as a redundancy link in each unit.

  The IC698CRE020, like any other RX7i CPU, is installed with a software program configured to initiate and complete specific tasks. Such tasks include controlling the device in real time mode, maintaining general machine processes, and handling materials applications. Additional features of the IC698CRE020 include 10MBs each of battery-backed memory and non-volatile flash memory, access to bulk memory, and user-configurable data and program memory. Auto-located Symbolic Variables are supported as are 90-70 Series discrete and analog I/O. Series 90-70 VME modules are also supported by this CPU. To avoid the possibility of losing the CPU’s RAM, it is advisable to maintain a routine procedure that involves replacement of the battery pack in due time. The battery is responsible for the overall stability of operations like the calendar clock, data memory, and programs during the absence of power.

Processing Speed:700 MHz
CPU Memory:10 Mbytes
Floating Point:Yes
Serial Ports:3
Serial Protocols:Modbus RTU Slave, SNP, Serial I/O
Embedded Comms:RS-232, RS-486. Ethernet interface

商家电话:
18664396232