森帆犁刀式混合机SDH-0.3化工混合机SS316L材质混合机加工企业

　　森帆犁刀式混合机SDH-0.3化工混合机SS316L材质混合机加工企业

　　网页报价为参考价，具体按照设备材质、规格、配置、税运等实际报价为准。

　　上海森帆机械有限公司，欢迎咨询。。。。

　　结构特点：

　　1.飞刀作用 筒内均布的犁刀在高速运转时对物料除了轴向分散以外，还可带动物料沿圆形简体作圆周流动，中间的飞刀起到辅助混合和对结块料分散解聚的作用。

　　2.飞刀形状和转速 多层刀片的飞刀组与电机直连，标准转速一般为1440r/min；根据物料特性的差异，飞刀有多种形状和转速选择。

　　3.雾化喷嘴 在飞刀上方可增加雾化喷嘴，实现加液混合，由于此位置物料在飞刀剪切下聚集密度较小，雾化后的液料geng容易进入与粉料穿插混合。

　　4.负压进料 筒侧开的方形门可作为观察和清理之用，标准型带密封垫，锁扣紧固；可加装行程开关。

　　5.出料方式 此类型混合机亦可做成连续式混合机，通过调整出料阀的开口大小来控制物料在筒体内的滞留时间，以达到控制混合均匀度的目的。

　　Structural features

　　1.Flying knife action The ploughing tool in the cylinder can drive the material to flow aroundthe circular body in addition to the axial dispersion at high speed, and the flyingknife in the middle serves as an auxiliary mixing and dispersing and depolymerizationof the caking material.

　　2.Shape and speed of flying knife

　　The flying knife set of the multi-layerblade is directly connected to the motor, and the standard speed is generally 1440r

　　/ min. According to the differenceof material characteristics, the flying knife has a variety of shapes and rotationalspeed choices.

　　3.atomization burner Theatomizing nozzle can be added to the flying knife to realize the liquid mixing.Because of the small aggregation density of the material in this position, the atomizedliquid material is easier to be mixed with the powder intercalation.

　　4.Negative pressure feed

　　Cylinder side-opened square doorcan be used for observation and cleaning, standard type with gasket, lock fastening,can be fitted with stroke switch.

　　5.Discharge mode This type of mixer can also be made into a continuous mixer. By adjustingthe opening size of the outlet valve, the retention time of the material in thecylinder can be controlled to achieve the purpose of controlling the mixing uniformity.