联系人：萧先生
邮箱：josephxiao413@163.com
电话：19925424813
地址： 广东深圳市福田区新亚洲国利大厦2007
| 品牌 |
ON/安森美 |
型号 |
NCP5109ADR2G |
| 封装形式 |
SMD |
数量 |
10000 |
| 封装 |
SOIC8 |
|
The NCP5109 is a High Voltage gate Driver IC providing two outputs for direct drive of 2 N-channel power MOSFETs or IGBTs arranged in a half-bridge configuration version B or any other high-side + low-side configuration version A.
It uses the bootstrap technique to insure a proper drive of the High-side power switch. The driver works with 2 independent inputs.
NCP5109 = 200V
NCP5106 = 600V
| Features | |
|---|---|
| High Voltage Range: Up to 200 V
| |
|
dV/dt Immunity 50 V/nsec
| |
|
Gate Drive Supply Range from 10 V to 20 V
| |
|
High and Low Drive Outputs
| |
|
Output Source / Sink Current Capability 250 mA / 500 mA
| |
|
3.3 V and 5 V Input Logic Compatible
| |
|
Up to Vcc Swing on Input Pins
| |
|
Matched Propagation Delays Between Both Channels
| |
|
Outputs in Phase with the Inputs
| |
|
Independent Logic Inputs to Accommodate All Topologies (Version A)
| |
|
Cross Conduction Protection with 100 ns Internal Fixed Dead Time (Version B )
| |
|
Under Vcc LockOut (UVLO) for Both Channels
| |
|
Pin-to-Pin Compatible with Industry Standards
| |
|
Half-Bridge Power Converters
| |
|
Any Complementary Drive Converters (Asymmetrical Half-Bridge, Active Clamp) (A version only).
| |
|
Full-Bridge Converters
|
| Applications | End Products | |
|---|---|---|
| Current Fed push-pull converters Half and Full Bridge power converters Two switch forward power converters
|
Solid state motor drives
|
19925424813