美国Compliance West 12KV浪涌脉冲发生器IEC62368

　　美国Compliance West 12KV浪涌脉冲发生器IEC62368

　　12KV HIGH VOLTAGE IMPLUSE GENERATOR

　　Brand: USA COMPLIANCE MODEL:1.2x50-12KV

　　Application

　　Surge Testing for spacing perParagraph 14 of EN60335and optionally the 1.2x50 tests inEN 60950, Annex N. The tester is available with maximum voltages of 7200V and12kV.

　　Standards

　　IEC60335-1 chap.14/table 6., EN60335-1, IEC61180-2

　　Specifications

　　Same as the testerabove, except with a 12kV output to perform all tests noted in EN 60335,Paragraph 14. The virtual impedance is 12 ohm, in accordance with the Standard,and the tester will charge within 3 seconds in accordance with the fastestrepetition rate allowed by the Standard. For automated pulse train testing, useour MegaPulse TestMinder option,which allows automated pulsetrain testing controlled from a PC.

　　Ships in a 17" by 36" enclosure.

　　Options includerelay outputs for PLC control, a 1000:1 oscilloscope output BNC jack formonitoring voltage, a current shunt output BNC jack, and MegaPulse TestMinder.

　　Designed with operator safety in mind: Set up the EUT to the right andbehind the tester, and a right-handed operator will find himself standing tothe left of the tester, allowing maximum separation.

　　Theoretical graphs andactual graphs showing the output of your tester are included with eachMegaPulse, allowing easy sanity checks and proof to visiting agency engineersof test setups.

　　1000:1 BNC Oscilloscopeoutput option allows quick connections and easy evaluation of output waveforms.

　　Reverse polarity waveformsavailable by pushing a button on the front panel. No need to change the testsetup. Positive polarity indication minimizes errors.

　　Front panel voltage meter shows residual voltage in charging circuit forsafer operation.

　　Model:1.2x50-12KV

　　Voltage open circuit: 0.4-12KV

　　Accuracy: +/- 3 %, No load voltage waveshape 1.2x50uSec:

　　Pulse front time: 1.2us +/- 30% (1.67 times between 30% and 90%), Per IEC 61180.

　　Pulse time to half value: 50us +/- 20%, Per IEC 61180.

　　Internalvirtual resistor: 12 ohm at 12kV

　　Polarity: Pos / Neg

　　Trigger: Manually or PC automation (optional)

　　InputPower: AC220V/ 50 Hz (other optional)

　　Weight: 90 lbsfor both theTester and auxiliary fast charge power supply.

　　Dimension: 6Ux17inTester, 5" by 12" by 12" power supply.

　　Environmental

　　Operating Temperature: 15-40℃

　　Relative Humidity Rang: 0-90%non-condensing