联系人:销售经理
邮箱:13523547676@163.com
电话:13523547676
地址: 中国 河南 新乡市河南省新乡市平原示范区嵩山大道6号
| 型号 |
ZR-YJV22-8.7/15KV-3*400 |
芯数 |
三芯 |
| 线芯材质 |
紫铜线 |
护套材质 |
PVC |
| 执行标准 |
国标 |
加工定制 |
是 |
| 是否进口 |
否 |
额定电压 |
8.7/15K |
| 标称截面 |
400 |
产地 |
河南 |
| 厂家 |
河南金水电缆集团有限公司 |
|
额定电压0.6/1~64 /110kV交联聚绝缘电力电缆0.6/1~64/110kV XLPE Insulated Power Cable
产品简介Brief introduction
额定电压0.6/1-64/110KV交联聚绝缘电力电缆具有优良的电气性能、导体长期工作温度高,承受短路电流大、载流量大、短期过载能力强、使用寿命长、重量轻、不受落差限制、安装和运行维护方便等优点,在我国得到了广泛的应用。随着工艺手段的不断完善和电须材料的日益改进。我厂的额定电压0.6/1-64/110KV交联聚绝缘电力电缆电气及机械性能更稳定、故障率低、使用寿命明显提高。Rated voltage 0.6/1-64/110kV XLPE insulated power cables have been widely used in our country with the advantages of excellent electric properies higtong term working temperature, strong ability to resist short circuit, long service life, light weight, without the limit of fal, easy to instal, operate andmaintain,etc.
产品标准Standards
我公司产品按GB/T 12706-2008《额定电压1kV(Um=1.2KV)到35KV(Um=40.5K)挤包绝缘电力电统及附件》、GB/T 11017-2002《额定申压110KV交联聚绝缘电力电缆及附件》生产交联聚烯绝缘电力电缆。GB/T 12706-2008标准等同采用国际电工委员会标准IEC 60502:2005《额定压1kV(Um=1.2kV)到30KV(Um=36kV) 挤包绝缘电力电缆及附件》,GB/T 1017-2002参照采用国际电工委员会标准EC60840:1999《额定电压大30kV(Um=36kV)至150kV(Um=170kV)挤包固体绝缘电力电缆及附件》。
我公司可生产各类阻燃和普通交联聚绝缘电缆,以及生产耐火、无卤低烟等全系列交联聚绝缘的电力电缆,其中阻燃电缆分为A、B、C
D各级。我们可以按照用户的要求,生产符合IEC 60502:2005和EC 60840:1999的产品,同时可按照用户要求,设计、制造具有特殊要求的、性能更高的交联聚绝缘电力电缆。The XLPE insulated cables manufactured by our factory are strictly produced according to the standards of GB/T12706-2008 "Power cable with extrudedinsulation and their accessories for rated voltages from 1kV to 35kV, and GB/T 11017-2002 Power cable with cross-inked polyethylene insulation and theracoessories for rated Votage of 110k/..The GB/T12706-2008 is equal to lEC 60502:2005 "1-30kV plastic insulated power cable’ and GB/T 11017.202 is equal to IEC 60840:1999 'The test of 30kV~ 150kV extruding insulated power cables’ .We can produce products compling witnIEC60502:205 "Rated Voltage 1~30kV extruding insulated power cable and accessories’to meet the requirement of our cients. We can produce
XLPE power cables with special requirement and higher properties according to the requirements of clients.
使用特性Characteristics
1,导体的额定温度为90C。 The highestratedtemperature ofthe conductoris 90C2.短路时(最长持续时间不超过5s)电缆导体的温度不超过250C
The highest temperature of the conductor of cables shall be less than 250'C(Max. duration: 5s) during short circuit.3.电缆敷设时。在保证足够机械拉力的情况下不受落差限制,但单芯电缆不允许敷设于铁质管道中,也不允许沿电缆周围形成环状的铁质金具固定电缆。