FAIRCHILD电动/气动I/P、E/P转换器T5200-90

　　FAIRCHILD电动/气动I/P、E/P转换器T5200-90

　　电动 /气动 I/P, E/P转换器（T5200）

　　Model T5200 Electro-Pneumatic I/P,E/P Transducer

　　特性

　　Features

　　1.对输入信号的快速响应可更快地控制回路并节省过程控制材料。

　　Fast Response to Input Signal changes results in faster loop control and saving in process materials.

　　2.空气消耗低，允许用于操作稀有空气的系统中。

　　Minimal Air Consumption allows use in systems where operating gas is expensive.

　　3.五种输入信号，满足多数过程控制和机器要求。

　　Five Input Signal Ranges meet most process and machine requirements.

　　4.温度补偿可在温度变化期间提供稳定的操作。

　　Temperature Compensation provides stable operation over wide temperature Range.

　　5.尺寸紧凑，允许用于空间有限的区域。

　　Compact Size permits use in space restricted areas.

　　6.防震动可在不利的震动环境中保持设定点。

　　Vibration Resistance maintains set points under adverse vibration conditions.

　　7.各种安装配置，允许针对多数应用灵活安装。

　　Various Mounting Configurations allow installation flexibility for most applications.

　　8.对室外和室内安装可提供NEMA 3R密封。

　　NEMA 3R Enclosure available for outdoor and indoor installation.

　　仙童T5200传感器是一个快速响应I / P,E / P换能器由4 - 20mA电流控制在一个控制回路。以其可靠的信号转换和气动回路部分,T5200 I / P换能器提供快速响应输入信号的变化,从而导致更快的循环控制和节省材料的过程。信号转换部分(印刷电路板)接受4 - 20mA电流控制回路。这个信号电流线圈,应用创建一个磁力,弯曲手臂。气动部分是一个力平衡系统。蓝宝石球漂浮在一个喷嘴和控制输出压力通过耗尽空气通过一个孔。这个蓝宝石球作为活塞施加一个力平衡的力量弯曲手臂。其空气消耗量小允许您在系统操作中使用T5200气体是昂贵的。5个可用的输入信号范围提供多功能性满足大多数过程和机器的要求。这些可用的输入1 - 5 mA,4 - 20mA,10 - 50 mA,1 - 5 VDC,1 - 9 VDC,每个都有相应的输出范围至3-15psig,(0.2 - -1.0BAR),(20 - 100 kPa)。

　　FAIRCHILD T5200 transducer is a fast response I / p, e / p transducer is controlled by 4 - 20 ma current in a control loop. With its reliable signal conversion and pneumatic circuit part, the t I / p transducer provides a rapid response input signal change, resulting in faster cycle control and savings of materials. The signal conversion section ( printed circuit board ) accepts 4 - 20 ma current control circuit. This signal current coil, the application creates a magnetic force, bent the arm. The pneumatic part is a force balance system. The sapphire ball floats in a nozzle and controls the output pressure through a hole through the exhaust air. The sapphire ball is used as a piston to exert a force balance force to bend the arm. The minimum air consumption allows you to use t gas in system operations is expensive. The 5 available input signal ranges provide versatility to meet most processes and machines. These available inputs 1 - 5 ma, 4 - 20 ma, 10 - 50 ma, 1 - 5 VDC, 1 - 9 VDC, each with a corresponding output range up to 3 - 15 psig ( 0.2 - 1.0 bar ), ( 20 - 100 kpa ).