联系人：华小姐
邮箱：2607459261@qq.com
电话：18020765256
地址： 福建厦门市湖里区湖里区后埔东里13号104
Disassembly Instructions Provide a cleansurface for work area. Separate the pumphead from the magnet cap. Remove the 3screws and disassemble front housing, driven gear , central housing and dowelpins . If the pump is equipped with by-pass, make sure not to damage thesealing poppet . Remove the poppet assembly from the adjusting screw (fig. 5),remove the by-pass nut, the adjusting screw turning counter-clockwise, theby-pass washer and the by pass seal fromthe cap. Remove the screws which securethe magnet cup and the mounting plateto the rear housing and disassemble. Remove and discard all the bushings from the rear housing and the front housing with the bushing extractor tool P/N 60211(fig.1). Remove seal and flat seals fromthe rear housing and from the front housing and discard them. If wear on fronthousing, rear housing or center housing is excessive, rebuilding the pump mynot be advisable.
MG213SG1GT
MG213YD0PT
MG213YD0TT
MG213YD0GT
MG213YD1PT
MG213YD1TT
MG213YD1GT
MG213YG0PT
MG213YG0TT
MG213YG0GT
MG213YG1PT
MG213YG1TT
MG213YG1GT
MG217XD0PT
MG217XD0TT
MG217XD0GT
MG217XD1PT
MG217XD1TT
MG217XD1GT
MG217XG0PT
MG217XG0TT
MG217XG0GT
MG217SD0PT
MG217SD0TT
MG217SD0GT
MG217SD1PT
MG217SD1TT
MG217SD1GT
MG217SG1PT
MG217SG1TT
MG217SG1GT
MG217YD0PT
MG217YD0TT
MG217YD0GT
MG217YD1PT
MG217YD1TT
MG217YD1GT
MG217YG0PT
MG217YG0GT
MG217YG0TT
MG217YG1PT
MG217YG1TT
MG217YG1GT
MS204XD0PT
MS204XD0TT
MS204XD0GT
MS204XD1PT
MS204XG0PT
MS204XG0TT
MS204XG0GT
MS204XG1PT
MS204SG0PT
MS204SG0TT
MS204SG0GT
MS204SG1PT
MS204SG1TT
MS204SG1GT
MS204YD1PT
MS204YD1TT
MS204YD1GT
MS204YG0PT
MS204YG0TT
Fluid-o-Tech齿轮泵工作时，主动轮随电动机一起旋转并带动从动轮跟着旋转。当吸入室一侧的啮合齿逐渐分开时，吸入室容积增大，压力降低，便将吸人管中的液体吸入泵内；吸入液体分两路在齿槽内被齿轮推送到排出室。液体进入排出室后，由于两个齿轮的轮齿不断啮合，使液体受挤压而从排出室进入排出管中。主动齿轮和从动齿轮不停地旋转，泵就能连续不断地吸入和排出液体。
泵体上装有安全阀，当排出压力超过规定压力时，输送液体可以自动顶开安全阀，使高压液体返回吸入管。
内啮合齿轮泵，它由一对相互啮合的内齿轮及它们中间的月牙形件、泵壳等构成。月牙形件的作用是将吸入室和排出室隔开。当主动齿轮旋转时，在齿轮脱开啮合的地方形成局部真空，液体被吸入泵内充满吸入室各齿间，然后沿月牙形件的内外两侧分两路进入排出室。在轮齿进入啮合的地方，存在于齿间的液体被挤压而送进排出管
18020765256