玖城牌合成切削液 JC Synthetic Cutting Fluid

　　玖城凭借其高于行业平均水平的创新速度和高度的化程度而出类拔萃！

　　玖城为您的业务选择合适的润滑油脂和解决方案有助于改善您的整体经营效率！

　　玖城坚持不断的将新科技、新材料应用于特种润滑油脂的开发和研制及生产领域！

　　jc玖城润滑油；倡导智慧润滑油脂应用解决方案！助力智能智造，引领润滑油革命！

　　jc玖城润滑油；致力于太阳能、风电、高铁轨交、航空航天、等特种新材料及高端装备制造行业的润滑应用技术解决方案！

　　jiucheng lubricants; advocate intelligent lubrication oil application solutions,leading the lubricant revolution，leading the lubricant revolution。

　　jiucheng lubricants; dedicated to solar energy, wind power, high-speed rail, aerospace, military and other special new materials and high-end equipment manufacturing industry lubrication application technology solutions!

　　玖城牌合成切削液 jc synthetic cutting fluid

　　产品型号:nc405 nc406

　　产品描述:玖城牌半合成切削液是合成极压型产品，不含矿物油，由多种优质进口水溶性添加剂采用先进工艺调制而成，适用于特殊硬质材料、合金钢、不锈钢。长寿命，长期使用不变质，优良防锈性，良好润滑性，和优越抗极压效果，具很好低泡性，适用各种不同硬度、不同金属材质在cnc多刀具加工中心使用。

　　产品特点:

　　优异的润滑和冷却性能，可减轻刀具结屑瘤，提高加工件精度，降低刀具损耗。

　　良好的防锈、防腐性能，碱性低，对皮肤、眼睛无刺激。

　　浓缩液含且高，使用比例低，抗微生物性能好，工作液寿命长。

　　加工时渗透性好，清洗性好，对机床油漆无影响。

　　产品应用:

　　适用于金属的重负荷车削、铣削、磨削、钻削、攻丝等加工，能适合加工中心多刀具、多种金属混合加工的复杂状况，起润滑、冷却和防锈作用。

　　推荐使用浓度3%～10%

　　jc synthetic cutting fluid

　　product number:nc405 nc406

　　product deion:

　　jc semi synthetic cutting fluid is a synthetic extreme pressure product without mineral oil.it is made up of many advanced imported water soluble additives using advanced technology refined.suitable for special hard material, alloy steel and stainless steel.long life, long-term use not metamorphic, excellent antirust, good lubricity,extreme anti -pressure effect, very good low bubble.applicable to various hardness and different metal materials used in cnc multi-tool machining center.

　　performance characteristics:

　　excellent lubrication and cooling performance can reduce the nodules of tools, improve machining accuracy and reduce tool wear.

　　good anti-rust, anticorrosive properties, low alkalinity, no irritation to skin and eyes.

　　the concentrate has high content, low use ratio, good microbiological resistance and long service life.

　　good permeability during processing, good cleaning, no effect on machine tool paint.

　　recommended use:

　　it is suitable for metal heavy load turning, milling, grinding, drilling, tapping and so on. it can be suitable for the complex conditions of multi tool and metal mixed processing in the processing center, and it can play the role of lubrication, cooling and rust prevention.

　　recommended using concentration of 3% to 10%.

　　玖城牌半合成切削液典型数据：typical data of jc semi synthetic cutting fluid:

　　██订购流程██

　　电话订购：传真订购：邮件订购：在线订购：

　　██售后服务██

　　苏州地区，免费送货上门，订购后2小时内送货，全国其他地区有专线配送！

　　██jc玖城主营产品；██

　　轴承齿轮润滑脂、高低温润滑脂、全氟聚醚润滑脂，高温链条油脂、特种润滑脂、特种润滑油、

　　special grease for bearings、high speed bearing grease、plastic gear grease、high temperature gear lubricating grease、high temperature chain grease、high and low temperature synthetic grease ultra-low temperature grease、ultra-low temperature grease high temperature greasesuper high temperature ynthetic grease high temperature anti-seize grease