衣料阻燃剂 涤纶阻燃整理剂 布料织物面料阻燃剂

衣料阻燃剂 涤纶阻燃整理剂 布料织物面料阻燃剂

价格 面议
起订量 10㎡
货源所属商家已经过真实性核验
品牌 浙江福尔普生新型材料有限公司
型号 T5101
关键字
在线咨询 立即下单 留言询价 电话咨询
浙江福尔普生新型材料有限公司
通过真实性核验手机验证
主营:
抗菌剂,防水防油整理剂,交联剂,凉感整理剂,吸湿发热整理剂,亲水易去污整理剂,吸湿速干整理剂,

进入店铺全部产品

店内推荐

联系我们

联系人:艾丽斯

邮箱:mahuateng@holposon.com

电话:18966343508

地址: 浙江嘉兴市海宁市经都二路18号创智大厦6层

产品详情
型号

T5101

产品名称

阻燃整理剂

主要成分

含磷化合物

主要用途

棉用

外观

无色至浅黄色透明粘液

PH适用范围

2-4

包装规格

70KG/桶

产地

浙江

厂家

HOLPOSON 福尔普生

  阻燃整理剂HOLPOSON®Pyroman是一种无卤的涤纶用阻燃剂,能够有效阻止涤纶纺织品火焰蔓延,处理阻燃剂HOLPOSON®Pyroman的面料被赋予难燃的防护功能,持久性及耐水洗性强,长期有效地发挥阻燃功能。适合全涤面料和部分涤纶锦纶混纺织物。

  物化性能

  外 观 无色至浅黄色透明粘液

  离 子 性 弱阳离子

  主要成分 含磷化合物

  pH值 2~4

  溶 解 性 可溶于水

  

  二、使用方法

  阻燃剂HOLPOSON®Pyroman整理的方法是浸轧法。在阻燃处理前需要做碱减量处理,以改变涤纶的吸湿性、手感,有效去除织物表面的杂质,显著提高阻燃整理效果。

  工艺配方:

  阻燃剂HOLPOSON®Pyroman 40~80g/L

  工作液的配制:

  在配液槽中加入70~80%的水,再加入阻燃剂HOLPOSON® 火人,搅拌,然后加入其他助剂(需预先试验其是否影响阻燃效果),并加入至规定刻度,搅拌均匀。配好的工作液8小时应用完。

  工艺流程:

  织物 → 二浸二轧(轧液率60~70%)→ 烘干(80~100℃)→焙烘(170~190℃×1~3min)→ 水洗 → 烘干

  注意事项

  1.配制好的溶液请于8小时内使用

  2.对一些特殊染料,生产前应做色光变化小试

  3.上述工艺配方和工艺过程根据具体加工条件作适当调整

  4.焙烘温度必须严格控制,否则影响耐洗性和阻燃效果

  

  包装: 50KG\60KG\70KG塑料桶,贮存期为12个月。开包使用后应确保容器密闭

  室内存放,避免高温、严寒。

  

  温馨提示:本网站所展示单价均为200g 小样运费,各产品实际单价待确认要求后报价。

  Flame Retardent Finishing Agent

  HOLPOSON® PyroMan

  PyroManis a new type halogen-free flameretardant finishing agent, which can effectively prevent the spread of flame.The fabric treated with PyroMan is endowed with flame-retardant protection,which is highly durable and wash resistant, constantly and effectivelyretarding flames. It’s suitable for polyester fabric and part ofpolyester-nylon blends.

  Physical & chemical properties:

  Appearance: Colorlessto light yellow transparent mucus

  Ionicity: Weak cation

  Maincomponents: Phosphorus compounds

  pHvalue: 2-4

  Solubility: Soluble in water

  Usage:

  Thefinishing method of PyroMan is padding. Alkali peeling is recommended beforeflame retardant treatment to improve the moisture absorption and hand feel ofpolyester and effectively remove impurities on the textile surface, thussignificantly improving the effect of flame retardant finishing.

  1.Recipe:

  PyroMan:40-80g/L

  2.Preparation of working solution:

  Add70-80% water into the mixing tank, then add the agent RINGECOLIVE® PyroMan,stir it, and then add other auxiliaries (necessary to test in advance whether they affect the flame retardanteffect), then dilute to the specified scale, finally stir evenly. The preparedworking solution should be consumed in 8 hours.

  3.Process:

  Fabric→ dip and roll twice (Liquid retention rate: 60-70%) → drying (80-100 ℃) →baking (170-190 ℃ × 1-3min) → washing → drying

  Attentions:

  1:Please consume the prepared solution within 8 hours

  2:For some special dyes, a sample test for color change should be done beforeproduction

  3:The above recipe and process should be adjusted according to specific processingconditions

  4:The baking temperature must be strictly controlled, otherwise the washdurability and flame retardant effect will be compromised.

  Storage:

  1.Packaging:50/60/70Kg/plastic barrel

  2.Storage period: 12 months

  3.Ensure the container tightness after unpacking

  ALICE

售后服务

商家电话:
18966343508