供应PC、PS、PP、 PE、PLA、PVC 单层或多层模具

　　上海金纬机械 联系人:陈猛 电话: 详细了解:

　　模头采用渐变水滴形平肩式流道，配合三角形分流技术，阶梯式稳流，有效消除了挤出过程中因高压 导致模口变形。上模唇为手动推出式微调弹性模唇，调整，平面式节流棒，能够消除物料滞留，解 决因停留过长导致分解。下模唇可换，可根据不同厚度配备不同开口的模唇。适用生产PC、PS、PP、 PE、PLA、PVC 等单层或多层片板。 JW-P-C2 片材模头系列 Sheet Die Series 标准衣架式流道设计，上模唇采用推拉式或推出式微调，下模唇可换，调节范围大达5mm，适用生 产PC、PMMA、GPPS、PET、等单层或多层高透明片材或板材。 Standard coat-hanger design, the upper die lip adjusting adopts the push-pull type or push-out fine-tuning type;the lower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA, GPPS, PET, single-layer or multi-layer high transparent sheet or plate JW-B-C1 重型模头采用标准衣架式流道设计，上模唇可调、下模唇可换及45 度调节阻流棒调节装置，能够满足 不同厚度制品的需求。适用生产宽度在2000mm 以下，厚度3-30mm 的ABS、PE、PP 厚板。 With special coat-hanger channel design, adjustable upper die lip, changeable lower die lip and 45°blocking bar, the die adapt to ABS, PE, PP thick plate with the width below 2000mm and thickness between 3-30mm. JW-B-A2 Adopting gradually water drop shape and flat shoulder type flow channel ,with triangle diversion technology, ladder style flow, effectively eliminate the extrusion process for high pressure lead to mould mouth deformation.The upper die lip is a manual push-off type fine-tuning elastic modulus lip.precisely adjustment,with a flat blocking bar can eliminate the material stranded, solve the materials decompose problem because of stay too long.The die lip can exchange, according to different thickness equipped with different open die lip. Applicable for PC, PS, PP, PE, PLA, PVC single-layer or multi-layer plate. 11