联系人:杨飞
邮箱:yangfei841219@163.com
电话:15821939963
地址: 上海松江区泗泾镇方泗路240弄
| 品牌 |
SSMTECH |
型号 |
SSM-CTB8 |
| 货号 |
1 |
材质 |
不锈钢 |
| 加工定制 |
是 |
是否进口 |
否 |
| 产地 |
江苏 |
|
| 参数 parameter
|
技术指标 qualification
|
|
工作电压 working voltage
|
12~30VDC
|
|
显示位数 Number of digits are displayed
|
5位半 Five and a half bits
|
|
1路称重信号输入 1-way weight signal input
|
0~39mV
|
|
激励电压输出 Incentive voltage output
|
5VDC
|
|
采样频率 Maximum sampling frequency
|
1000Hz
|
|
零位漂移 zero drift
|
<0.02μV/°C
|
|
增益漂移 gain drift
|
±5PPM/°C
|
|
非线性度 Nonlinearity
|
0.002% F.S.
|
|
精度 accuracy
|
0.012% F.S.
|
|
开关量输入 on-off input
|
3点晶体管输出、24V/1A带载能力,1路输入(可选) 3-point transistor output, 24V/1A with load capacity, 1-way input (optional)
|
|
开关量输出 Switch volume output
|
2点继电器输出,250VAC/3A 阻性负载(可选) 2-point relay output, 250VAC/3A resistive load (optional)
|
|
RS232接口 RS232 interface
|
RS232接口;支持Modbus RTU协议和自由协议 RS232 interface; supports Modbus RTU protocol and free protocols
|
|
RS485接口 RS485 interface
|
RS485接口;最多并列32个节点;支持Modbus RTU协议和自由协议 RS485 interface; tie for up to 32 nodes; support Modbus RTU protocol and free protocols
|
|
模拟量信号输出 Analog volume signal output
|
4-20mA;0-5V;0-10V;分辨率1/3000(可选) 4-20mA;0-5V;0-10V; resolution of 1 / 3000 (optional)
|
|
A/D性能 A/D performance
|
24位,Delta-Sigma方法 The 24-bit, Delta-Sigma method
|
|
采样和输出速率 Sampling and output rate
|
10、40、640、1280次/秒 10,40,640,1280 times / s
|
|
通信接口 communication interface
|
RS232 /485
|
|
储存温度 storage temperature
|
-25°C~+65°C
|
|
工作温度 working temperature
|
-30°C~+60°C
|
|
相对湿度 relative humidity
|
湿度:35~85%RH;存储:35~85%RH Humidity: 35~85%RH; Storage: 35~85%RH
|
|
防护等级 levels of protection
|
IP65
|
|
耐电压 withstand voltage
|
在2000V AC50/60Hz下1分钟 Under 1 minute at 2000V AC50/60Hzh
|
| 仪表型号 Instrument model
|
选配型号 Option of the model
|
备注 remark
|
|
CTB8
|
|
标准配置,2路开关量输出 Standard configuration, 2-way switch volume output
|
|
T1
|
晶体管输出 Transistor output
| |
|
A1
|
增加模拟量信号输出 Increase the analog volume signal output
| |
|
C1
|
增加RS485输出 Increase the RS485 output
| |
|
C2
|
增加RS232输出(与RS485 2选1) Increase RS232 output (select 1 with RS485 2)
| |
|
TS
|
增加teds免标定功能(传感器必须带此功能) Add the teds no-calibration function (which must be provided with the sensor)
| |
|
D6
|
6位数显 Six-digit display
|