PIC32MX460F512L-80I/PT TQFP100 32位MCU, 512KB Flash,32 KBRAM

　　80MHz/105DMIPS, 32-bit MIPS M4K Core

　　USB 2.0 On-The-Go Peripheral with integrated PHY

　　Dedicated DMA Channel for USB OTG

　　5 Stage pipeline, Harvard architecture

　　MIPS16e mode for up to 40% smaller code size

　　Single cycle multiply and hardware divide unit

　　32 x 32-bit Core Registers

　　32 x 32-bit Shadow Registers

　　Fast context switch and interrupt response

　　512K Flash (plus 12K boot Flash)

　　32K RAM (can execute from RAM)

　　4 Channel Hardware DMA Controller

　　Flash prefetch module with 256 Byte cache

　　Lock instructions or data in cache for fast access

　　Programmable vector interrupt controller

　　Fast and Accurate 16 channel 10-bit ADC,

　　Max 1 Mega samples per second at +/- 1LSB, conversion available during SLEEP & IDLE

　　RUN, IDLE, and SLEEP modes

　　Multiple switchable clock modes for each power mode, enables optimum power settings

　　8 hardware breakpoints (6 Instruction and 2 Data)

　　2 wire programming and debugging interface

　　JTAG interface supporting Programming, Debugging and Boundary scan

　　iFlow Trace: Non-intrusive Hardware Instruction Trace port (5 Wires)

　　Fail-Safe Clock Monitor – allows safe shutdown if clock fails

　　Hardware RTCC (Real-Time Clock and Calendar with Alarms)

　　2 Internal oscillators (8MHz & 31KHz)

　　Watchdog Timer with separate RC oscillator

　　Pin compatible with 16-bit PIC® MCUs