OM-WLS-TEMP美国OMEGA

OM-WLS-TEMP美国OMEGA

价格 面议
起订量 10㎡
货源所属商家已经过真实性核验
品牌 Omega/欧米伽
型号 OM-WLS-TEMP
关键字
在线咨询 立即下单 留言询价 电话咨询
深圳市鑫博恒业科技有限公司
通过真实性核验手机验证
主营:
美国omega热电偶

进入店铺全部产品

店内推荐

联系我们

联系人:赵先华

邮箱:235521054@qq.com

电话:13823144468

地址: 广东深圳市深圳市福田区华强北路华强广场A栋17A

产品详情

  OM-WLS-TEMP美国OMEGA

  OM-WLS-TEMP

  数据采集 ? 传感器, 发送器, 接收器, 仪表和控制器 ? OM-WLS-TC

  Eight Channel Wireless Thermocouple Input Module

  OM-WLS-TC

  8 Thermocouple Input Channels

  Supports Thermocouple Types J, K, T, E, N, R, S, B

  Built-In Cold Junction Compensation and Open Thermocouple Detection

  Eight Digital I/O–User Configuration for Alarms

  802.15.4 Wireless Protocol

  Range: Up to 46 m (150') Indoors and 732 m (2400') Outdoors

  产品描述

  The OM-WLS-TC is a wireless USB 2.0 full-speed thermocouple input module (fully compatible with both USB 1.1 and 2.0). The OM-WLS-TC provides 8 differential thermocouple input channels. Eight independent, TTL compatible digital I/O channels are provided to monitor TTL level inputs, communicate with external devices and to generate alarms. The digital I/O channels are software programmable for input or output. The OM-WLS-TC supports Types J, K, T, E, N, R, S and B thermocouples. Two integrated cold junction compensation (CJC) sensors are included for thermocouple measurements. An open thermocouple detection feature allows detection of a broken thermocouple. An onboard microprocessor automatically linearizes the measurement data. The OM-WLS-TC features 8 independent temperature alarms. Each alarm controls an associated digital I/O channel as an alarm output. The input to each alarm is one of the temperature channels. The output of each alarm is software configurable as active high or low. The temperature threshold conditions to activate each alarm are software programmable. When an alarm is activated, the associated digital output channel is driven to the output state. All configurable options are software programmable. The OM-WLS-TC is fully software-calibrated.

  The OM-WLS-TC can be operated as a standalone plug-and-play device which draws power through the USB cable. The unit can also be operated as a remote device that communicates with the computer through the OM-WLS-IFC USB-towireless interface device. An external power supply is shipped with the device to provide power during remote operation. When operating as a remote device, the OM-WLS-TC communicates with the computer through the OM-WLS-IFC device connected to the computer’s USB port. Before the OM-WLS-TC can be operated remotely, it needs to be connected to the computer’s USB port and the network parameters configured to establish a wireless link with the interface device.

  Only devices with the same parameter settings can communicate with each other. All configurable options are software programmable using the included InstaCal? utility software. LEDs on the OM-WLS-TC indicate the status of communications over the wireless link. A LED bar graph shows the fade margin of signals received by the OM-WLS-TC.

  The OM-WLS-TC modules ship with an impressive array of software, including the new TracerDAQ?, a full-featured, out-of-the-box data logging, viewing, and analysis application. Driver support and detailed example programs are included for Universal Library programming libraries for Microsoft? Visual Studio? programming languages, and other languages, including DASYLab?, and ULx for NI LabVIEW? (comprehensive library of VIs and example programs compatible with 32-bit and 64-bit LabVIEW v8.5 through 2012) and InstaCalTM installation, calibration and test utility-powerful solutions for programmers and nonprogrammers alike. These modules operate under Microsoft Windows? XP (32-bit only) and VISTA/7/8 (32-bit and 64-bit) operating systems.

  SPECIFICATIONS

  ANALOG INPUTS

  A/D Converter: Four dual 24-bit sigma delta A/D converters

  Input Isolation: 500 Vdc min between field wiring and USB interface

  Number of Channels: 8 differential thermocouple inputs

  Differential Input Voltage Range: ±0.080V

  Absolute Maximum Input Voltage: ±25V (power on), ±40V (power off)

  Throughput Rate: 2 samples/sec max for all active channels

  Input Impedance: 5 GΩ min

  Input Leakage Current: 105 nA max (with open thermocouple detection enabled)

  Normal Mode Rejection Ratio: 90 dB min

  Common Mode Rejection Ratio: 100 dB min

  Warm-Up Time: 30 minutes max

  Open Thermocouple Detection: Automatically enabled when a channel

  is configured for a thermocouple sensor

  CJC Sensor Accuracy: ±0.25°C typical, ±0.5°C max (15 to 35°C);

  -1.0 to 0.50°C max (0 to 70°C)

  DIGITAL I/O

  Digital I/O Channels: 8

  Type: CMOS

  Configuration: Each DIO bit can be independently configured for input or output.

  Power on reset is input mode unless bit is configured for alarm

  Pull-Up/Pull-Down Configuration: All pins pulled up to 5V via 47 kΩ resistors (default).

  Pull-down to ground (GND) also available

  Digital I/O Transfer Rate

  (Software Paced):

  Digital Input: 50 port reads or single bit reads per second (typical)

  Digital Output: 100 port writes or single bit writes per second (typical)

  Input High Voltage: 2.0V min, 5.5V absolute max

  Input Low Voltage: 0.8V min, -0.5V absolute min

  Output High Voltage: 0.7V max (IOL = 2.5 mA)

  Output Low Voltage: 3.8V min (IOH = -2.5 mA)

  Temperature Alarms: 8 (one per digital I/O line)

  WIRELESS COMMUNICATIONS

  Protocol: IEEE 802.15.4, ISM 2.4 GHz

  Range: Up to 50 m (150') indoor/urban; up to 1/2 mile

  (750 m) outdoor line-of-sight

  Transmit Power: 10 mW (10 dBm)

  Receiver Sensitivity: -100 dBm (1% packet error rate)

  RF Channels: 12 direct sequence channels available,

  channels 12-23 (2.410-2.465 GHz), software able

  Addressing: 16-bit PAN (personal area network)

  IDs per channel (software able)

  Encryption: 128-bit AES (software able)

  GENERAL

  Memory: EEPROM

  Microcontroller: Three highperformance 8-bit RISC microcontrollers

  Power Supply Voltage (Supplied by USB Port): 4.75V min to 5.25V max

  Power Supply Current (Supplied by USB Port): 500 mA max

  User Output Voltage (+5V): 4.75V min to 5.25V max, 10 mA max

  (connected to self-powered hub)

  Isolation: 500 Vdc min measurement system to PC

  Wireless Communications Operation Supply Current: 500 mA max

  (ac adaptor required for remote wireless communications operation)

  USB Device Type: USB 2.0 (full-speed)

  Device Compatibility: USB 1.1, USB 2.0

  USB Cable Length: 3 m (10') max

  Dimensions:127 L x 89 W x 36 mm H (5.0 x 3.5 x 1.4")

  Input Connections: Screw terminal blocks (accept 16 to 30 AWG wire)

  Operating Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH non-condensing

  Storage Temperature: -40 to 85°C (-40 to 185°F)

  Weight: 180 g (6.4 oz)

  产品编号 产品描述

  OM-WLS-TC 8-channel wireless thermocouple input module

  OM-WLS-IFC USB-to-wireless interface device (receiver)

  SWD-TRACERDAQ-PRO TracerDAQ Pro software

  SWD-DASYLAB DASYLab software

  OM-WLS-IFC

  OM-WLS-TC

  OM-WLS-TEMP

  OM-WLS-TEMP

  OM-WLS-TEMP美国OMEGA

  

  OM-WLS-TEMP美国OMEGA 新相关产品:OM-USB-3103美国OMEGA

  

售后服务

商家电话:
13823144468