OM-WEB-TEMP数据记录仪美国OMEGA OM-WEB-TEMP数据记录仪

　　the om-web-temp is a temperature measurement device with built-in web server. simply connect the device to an ethernet port or hub and view current data using a standard web browser. the om-web-temp’s embedded web interface provides access to current data and configuration settings using a standard web browser. browse to the device’s home page by entering the url that is printed on the device into the browser. view current sensor measurements and channel data, and configure hardware options from the device’s home page. only one user can change configuration options on the device at a time. the web interface is built into the device’s firmware, and does not need to be installed on a computer. no external software is required other than a web browser and a tcp/ip connection. connect the device’s 10base-t ethernet port to a local or wide area network using the supplied ethernet cable, to a single computer through a hub using the supplied ethernet cable, or directly to a computer using a standard cat-5 crossover cable. the web browser used to access the om-web-temp’s web interface must support java.

　　the om-web-temp provides 8 temperature channels and 8 digital i/o channels. the included external power supply (ac adaptor) is used to provide power. on-board leds display the status of communications and external power. all hardware configurable options are selectable with the web browser or the included instacaltm utility software. network configurable options are settable using instacal. when using instacal, if the login settings have been changed from the default, a login name and password are required to change the configuration settings.

　　the om-web-temp provides 8 differential input channels that are software programmable for different sensor types including:

　　? thermocouple types j, k, t, e, r, s, b, n

　　? rtd–2, 3 or 4-wire pt100 rtds

　　? 2-, 3- or 4-wire thermistor measurements

　　? semiconductor temperature sensors–lm36 or equivalent

　　the om-web-temp provides a 24-bit analog-to-digital (a/d) converter for each pair of differential analog input channels. each pair of differential inputs constitutes a channel pair. a different type of sensor (i.e., thermocouple, rtd, thermistor or semiconductor) can be connected to each channel pair, however both channels in the channel pair need to be the same sensor type (although if thermocouples are connected it is possible to mix thermocouple types). the om-web-temp provides four integrated cold junction compensation (cjc) sensors for thermocouple measurements and built-in current excitation sources for resistive sensor measurements, each cjc sensor is dedicated to one of the four channel pairs. an open thermocouple detection feature allows detection of a broken thermocouple. an onboard microprocessor automatically linearizes the measurement data.

　　the om-web-temp features 8 independent temperature alarms, each alarm controls an associated digital i/o channel as an alarm output. the input to each alarm is one of the temperature input channels, the output of each alarm is software configurable as an active high or low. the user configurable threshold conditions activate each alarm. when an alarm is activated, the associated dio channel is driven to the active output state selected. eight digital i/o channels are provided to communicate with external devices and to generate alarms. the digital bits are software programmable for input or output. the digital output voltage is switchselectable for 3.3v or 5v logic. a screw terminal is provided for pull-up or pull-down configuration.

　　the om-web-temp web interface displays current data read from the device and does not log or store historical data. use the included tracerdaq software to log or graphically trend your data. the om-web-temp module ships with an impressive array of software, including the new tracerdaq?, a fullfeatured, out-of-the-box data logging, viewing, and analysis application; universal library?; ulx for ni labview (comprehensive library of vis and example programs compatible with 32- and 64-bit labview v8.5 through 2011) and instacal? installation, calibration, and test utility—powerful software solutions for programmers and nonprogrammers alike. these modules operate under microsoft windows xp/vista/7 (32-bit and 64-bit) operating systems.

　　specifications

　　analog inputs

　　a/d converter: 4 dual 24-bit sigma delta a/d converters

　　input isolation: 500 vdc min between field wiring and usb interface

　　number of channels: 8 differential temperature inputs

　　differential input voltage range: thermocouple, ±0.080v

　　rtd: 0 to 0.5v

　　thermistor: 0 to 2v

　　semiconductor: 0 to 2.5v

　　absolute maximum input voltage: ±25v (power on), ±40v (power off)

　　throughput rate: 2 samples/sec max for all active channels

　　input impedance:v 5 gω min

　　input leakage current:

　　105 na max (with open thermocouple detection enabled)

　　normal mode rejection ratio: 90 db min

　　common mode rejection ratio: 100 db min

　　warm-up time: 30 minutes max

　　thermocouple input: software programmable for type j, k, t, e, r, s, b, n

　　open thermocouple detection: 3 sec open detection time (max)

　　cjc sensor accuracy: -0.75 to 0.5°c max (15 to 35°c);

　　-1.5 to 1.25°c max (0 to 55°c)

　　pt100 rtd input: 2-, 3- or 4-wire din 43760, α = 0.00385,

　　sama, α = 0.003911, its-90/iec751, α = 0.0038505

　　(3- or 4-wire connections take up 2 differential channels)

　　thermistor input: 2-, 3- or 4-wire standard 2252 through 30,000 ω

　　(3- or 4-wire connections take up 2 differential channels)

　　semiconductor sensor: tmp36 or equivalent

　　digital i/o

　　number of digital i/o channels: 8

　　type: cmos

　　configuration: each dio bit can be independently configured for input or output.

　　switch selectable output voltages of 5v or 3.3v.

　　power on reset is input mode unless bit is configured for alarm

　　pull-up/pull-down configuration: all pins are connected to 47 ω resistors

　　(user configurable for pull-up mode to 5v or pulldown mode).

　　digital i/o transfer rate (software paced): digital input;

　　50 port reads or single bit reads per second (typical):

　　digital output; 100 port writes or single bit writes per second (typical)

　　input high voltage: 4.0v min, 5.5v absolute max (5v mode);

　　2.64v min, 5.5v absolute max (3.3v mode)

　　input low voltage: 1.0v max, -0.3v absolute min (5v mode);

　　0.66v max, -0.3v absolute min (3.3v mode)

　　output high voltage: 4.3v min (5v mode),

　　2.7v min (3.3v mode); ioh = -2.5 ma

　　output low voltage: 0.6v max (iol = 2.5 ma)

　　temperature alarms: 8 (one per digital i/o line)

　　network

　　ethernet compliance

　　device type: ieee 802.3 ethernet 10base-t

　　device compatibility: ieee 802.3-2003 10 mpbs media access control

　　ethernet connection

　　ethernet type: 10base-t

　　connector: rj-45, 8 position

　　cable: cat-5 shielded, unshielded twisted pair

　　length: 100 m (328') max

　　mac address: 00:12:71:cx:xx:xx where xxxxx is the device’s serial number

　　network factory default settings

　　ip address: 192.168.0.101

　　subnet mask: 255.255.255.0

　　gateway: 192.168.0.1

　　dhcp setting: enabled

　　user name: “webtemp”

　　password: “omega”

　　web server: enabled

　　network protocols

　　protocols implemented: ip, arp, icmp, dhcp, udp, tcp, nbns, http

　　udp messaging protocol: udp port 54211

售后服务

OM-WEB-TEMP数据记录仪 美国OMEGA OM-WEB-TEMP数据记录仪

店内推荐

OM-WEB-TEMP数据记录仪美国OMEGA OM-WEB-TEMP数据记录仪