OM-USB-5203美国OMEGA

OM-USB-5203美国OMEGA

价格 面议
起订量 10㎡
货源所属商家已经过真实性核验
品牌 Omega/欧米伽
型号 OM-USB-5203
关键字
在线咨询 立即下单 留言询价 电话咨询
深圳市鑫博恒业科技有限公司
通过真实性核验手机验证
主营:
美国omega热电偶

进入店铺全部产品

店内推荐

联系我们

联系人:赵先华

邮箱:235521054@qq.com

电话:13823144468

地址: 广东深圳市深圳市福田区华强北路华强广场A栋17A

产品详情

  OM-USB-5203美国OMEGA

  OM-USB-5203

  八通道温度/电压输入USB数据采集模块

  OM-USB-TEMP, OM-USB-TEMP-AI and OM-USB-5203

  1年保修 CE OmegaCare

  八通道温度/电压输入USB数据采集模块

  OM-USB-TEMP, OM-USB-TEMP-AI and OM-USB-5203:八通道温度/电压输入USB数据采集模块

  om-usb-temp

  模型om-usb-temp和om-usb-5203 8温度输入

  4温度模型om-usb-temp-ai输入和4个模拟输入电压

  温度输入是可编程的热电偶,热电阻,热敏电阻或半导体温度传感器

  模型om-usb-5203具有数据记录功能(闪存)

  24位分辨率

  内置热电偶的冷端补偿和输入开路检测

  八个数字I / O

  无需外部电源要求(除了om-usb-5203)

  该om-usb-temp,om-usb-temp-ai和om-usb-5203是USB 2全速温度输入数据采集模块(完全兼容USB 1.1和USB 2端口)。这些插件和播放模块,绘制功率从USB电缆–没有外部电源是必需的(除

  om-usb-5203需要一个AC适配器)。所有的配置选项是可编程的,和模块完全软件校准。该om-usb-temp和om-usb-5203提供八的温度差输入通道。该om-usb-temp-ai提供八个模拟量输入通道被配置为四的温度差输入和四个差分或单端电压输入。温度输入可编程软件对不同类型的传感器,包括类型的J,K,T,E,R,S,B,N型热电偶,2,3或4线制Pt100 RTDS,2,3或4线电阻和半导体传感器和被配置在两个通道块。不同类型的传感器(热电偶,热电阻,热敏电阻,半导体)可以连接到每个块的两个通道(两个通道的类型必须相同)。

  如果两个信道的块设置为热电偶输入,可以混合使用的热电偶类型。例如,一个om-usb-temp可以配置4 RTD输入和4个热电偶输入而不是3 RTD输入和5个热电偶输入。这些模块集成冷端补偿(CJC),热电偶测量的线性化和开路检测(om-usb-temp和

  om-usb-5203有两个集成CJC传感器和om-usb-temp-ai有一个CJC传感器。电压输入(om-usbtemp-ai只)是软件可编程的±±5V,10V,±2.5V和±1.25V的范围。八个的,的TTL兼容数字I/O通道提供了监测TTL电平输入与外部设备进行通信,并产生报。数字I/O通道是软件可编程为输入或输出。

  八个的om-usb-5203特征温度报。每个报控制相关的数字I/O通道作为一个报输出。每个报输入的温度输入通道中的任意一个。每个报输出软件可配置为高电平或低。温度阈值条件激活每个报是用户可编程。当报被激活,相关数字I/O通道驱动输出状态。该om-usb-5203也有数据记录能力。测量可以记录到一个标准的CompactFlash存储卡(512 MB的CompactFlash卡是包含在om-usb-5203)。数据记录只能当om-usb-5203是从计算机断开。外部电源是用于数据记录通过附带的AC适配器要求。在数据记录模式的用户可编程设置包括采样间隔和测井启动模式(电源按钮按下时,或在指定的日期和时间)。

  该om-usb-temp,om-usb-temp-ai和船om-usb-5203模块软件的一系列令人印象深刻,其中包括新的tracerdaq,功能齐全,开箱数据记录,查看,和分析中的应用。驱动程序的和详细的例子程序,包括通用库编程库微软Visual Studio编程语言,和其它语言,包括DASYLabULX,和为NI LabVIEW(综合的VI库和示例程序通过2012的32位和64位的LabVIEW v8.5兼容)和instacaltm安装,程序员的程序员一样校准和测试工具的强大的解决方案。这些模块操作微软Windows XP下(32位只)和Vista / 7 / 8(32位和64位)操作系统。该om-usb-temp,om-usb-temp-ai和om-usb-5203数据采集模块提供tracerdaq软件,是一个集四虚拟仪器应用程序以图形的方式显示和存储输入数据并产生输出信号:

  条形图记录和统计值获得从模拟量输入,数字输入,温度输入计数器输入。

  示波器显示获取的值从模拟输入

  函数发生器产生的模拟输出波形

  频率发生器产生计数器输出波形tracerdaq Pro是一个增强版本tracerdaq。的一些特征的比较包括在tracerdaq VS tracerdq亲,看到PDF。

  规格

  ANALOG INPUTS

  A/D Converter:

  OM-USB-TEMP/OM-USB-5203: Four dual 24-bit sigma delta A/D converters

  OM-USB-TEMP-AI: Dual 24-bit sigma-delta A/D converters

  Input Isolation: 500 Vdc min between field wiring and USB interface

  Number of Channels:

  OM-USB-TEMP/OM-USB-5203:

  8 differential temperature inputs

  OM-USB-TEMP-AI:

  4 differential temperature inputs and 4 differential or single-ended voltage inputs

  Thermocouple Input: Software programmable for type J, K, T, E, R, S, B, N

  Pt100 RTD Input: 2, 3 or 4-wire DIN 43760, α = 0.00385, SAMA, α = 0.003911,

  ITS-90/IEC751, α = 0.0038505

  Thermistor Input: 2, 3 or 4-wire standard 2252 through 30,000 Ω

  Semiconductor Sensor: TMP36 or equivalent

  Maximum Input Voltage: Temperature inputs; ±25V (power on), ±40V (power off):

  voltage inputs; ±25V (power on), ±15V (power off)

  Throughput Rate: 2 samples/sec max for all active channels

  Input Impedance: Temperature inputs; 5 GΩ (power on), 1 MΩ

  (power off): voltage inputs; 10 GΩ (power on), 2.49 KΩ (power off)

  Input Leakage Current: Thermocouple inputs; 105 nA max

  (with open thermocouple detection enabled), 30 nA max

  (with open thermocouple detection disabled):

  voltage inputs; ±1.5 nA typ, ±25 nA max

  Maximum Working Voltage (OM-USB-TEMP-AI) Voltage Inputs:

  ±10.25V max (input signal + common mode)

  Common Mode Rejection Ratio: Temperature inputs, 100 dB min;

  voltage inputs, 83 dB min

  Warm-Up Time: 30 minutes max

  Open Thermocouple Detection: Automatically enabled when a channel

  is configured for a thermocouple sensor

  CJC Sensor Accuracy: ±0.25oC typical, ±0.5oC max (15 to 35oC);

  -1.0 to 0.75oC max (0 to 70oC)

  DIGITAL I/O

  Number of Digital I/O Channels: 8

  Type: CMOS

  Configuration: Each DI/O bit can be independently configured for input or output.

  Power on reset is input mode.

  Pull-Up/Pull-Down Configuration: All pins pulled up to +5V via 47 kΩ resistors (default).

  Pull-down to ground (GND) also available.

  Digital I/O Transfer Rate (Software Paced): Digital input; 50 port reads or single bit reads

  per second (typical), digital output; 100 port writes or single bit writes per second (typical).

  Input High Voltage: 2.0V min, 5.5V absolute max

  Input Low Voltage: 0.8V min, -0.5V absolute min

  Output High Voltage: 0.7V max (IOL = 2.5 mA)

  Output Low Voltage: 3.8V min (IOH = -2.5 mA)

  COUNTER

  (OM-USB-TEMP-AI ONLY)

  Number of Channels: 1

  Resolution: 32-bit

  Counter Type: Event counter

  Input Type: TTL, rising edge triggered

  Counter Read/Write Rates

  (Software Paced, System Dependent):

  33 to 1000 read/writes per second

  Schmitt Trigger Hysteresis: 20 mV to 100 mV

  Input Leakage Current: ±1.0 μA typical

  Input Frequency: 1 MHz max

  High Pulse Width: 500 ns min

  Low Pulse Width: 500 ns min

  Input High Voltage: 4.0V min, 5.5V absolute max

  Input Low Voltage: 1.0V max, -0.5V absolute min

  DATA LOGGING

  (OM-USB-5203 ONLY)

  Memory Card Type: CompactFlash (512 MB card included)

  Logging Rate: 1 sec up to 232 seconds (1 sec intervals)

  Logging Start Method: On power up, on but press or at specified date/time

  (user programmable)

  Logging Stop Method: But press

  GENERAL

  Power Supply Voltage (Supplied by USB Port): 4.75V min to 5.25V max

  Power Supply Current (Supplied by USB Port): lt;100 mA typical (USB enumeration);

  270 mA typical (continuous input with all inputs configured for disabled mode)

  User 5V Output Voltage Range (connected to self-powered hub):

  OM-USB-TEMP/OM-USB-5203; 4.75V min to 5.25V max

  OM-USB-TEMP-AI; 4.9 V min to 5.1 V max

  User 5V Output Current (bus powered and connected to self-powered hub):

  OM-USB-TEMP/OM-USB-5203; 10 mA max

  OM-USB-TEMP-AI; 5 mA max

  Isolation: 500 Vdc min measurement system to PC

  USB Device Type: USB 2.0 (full-speed)

  Device Compatibility: USB 1.1, USB 2.0

  USB Cable Length: 3 m (10') max

  Dimensions: 127 L x 89 W x 36 mm H (5.0 x 3.5 x 1.4")

  Input Connections: Screw terminal blocks (accept 16 to 30 AWG wire)

  Operating Temperature: 0 to 50oC (32 to 122oF), 0 to 90% RH non-condensing

  Storage Temperature: -40 to 85oC (-40 to 185oF)

  Weight:

  OM-USB-TEMP/OM-USB-TEMP-AI: 182 g (6.4 oz)

  OM-USB-5203: 227 g (8.0 oz)

  产品型号 产品描述

  OM-USB-TEMP 8-channel temperature input USB data acquisition module

  OM-USB-TEMP-AI 8-channel temperature/voltage input USB data acquisition module

  OM-USB-5203 8 channel temperature input USB data acquisition module with data logging capability

  SWD-TRACERDAQ-PRO TracerDAQ Pro software

  OM-USB-5200-ADAPTOR Spare 100/240 Vac 50/60 Hz ac adaptor for OM-USB-5203 (USA plug)

  OM-USB-5203

  OM-USB-5203美国OMEGA

  

  OM-USB-5203美国OMEGA 新相关产品:OM-USB-TC-AI美国OMEGA

  

售后服务

商家电话:
13823144468