OM-LGR-5327数据记录器 美国omega

　　OM-LGR-5327数据记录器 美国omega衍生阅读: 2、操作简单，性能可靠。 3、能以图表、曲线、报表等形式输出数据,进行数据的分析统计，并能将数据通过电子邮件传输。 4、可多次重复使用。 便携式单温度数据记录仪是专门设计用于超低功耗，超长时间温度数据记录的数据记录仪系列产品。该产品可以按照组态时间间隔定时采集记录温度参数，并可将采集记录的数据传送给计算机进行处理，绘制图表；广泛应用于农业实验室，工业，环保，卫生防疫，仓储运输，博物馆，温室等领域。该产品选用进口传感器、进口高能锂电池供电，采用低功耗技术设计，无需外部电源，体积小巧，整机功耗小，精度高，可连续工作三年以上。 技术参数编辑 温度范围（内置温度传感器）：-40°C~ 65°C 温度精度：±0.5 °C 温度分辨率：0.1°C 温度显示：LCD 温度探头：Pt1000 数据存储容量：30000组 记录采样间隔：1秒~24小时可调 延时启动：1秒~24小时可调 电池：锂电池, 用户可自行更换，一年使用时间 防水性能：IP65 软 件 专：用数据处理

　　OM-LGR-5327数据记录器 美国omega

　　独立、高速、多功能数据记录器

　　OM-LGR-5325, OM-LGR-5327 and OM-LGR-5329

　　1年保修 新产品! CE OmegaCare

　　独立、高速、多功能数据记录器

　　OM-LGR-5325, OM-LGR-5327 and OM-LGR-5329:独立、高速、多功能数据记录器

　　om-lgr-5325

　　16个模拟输入到±30V

　　16位分辨率

　　16工业数字输入到30V

　　单一的可配置的报警触发/ C型继电器的数字输出

　　4计数器输入（正交可用）

　　4 GB的SD存储卡包括，支持高达32 GB

　　多通道的模拟和数字触发

　　按钮控件的字段操作

　　该om-lgr-5320系列是高速，模拟和数字信号的独立的数据记录器。每个模块提供16个模拟输入，16个数字输入，一个单一的C型继电器（0.5A）触发/惊人的数字输出，和四计数器/编码器输入。这些设备允许用户在没有计算机的情况下收集高速相关模拟和数字数据。om-lgr-5320设备进行相关测量，高速，高达200 kS / s，直接对安全数字（SD）或SDHC记忆卡。利用先进的模拟和数字触发选项，用户可以收集数据，以监测系统和事件没有致力于PC。om-lgr-5320记录器包括易于使用的daqlog软件配置设备和检索数据，通过USB接口或SD记忆卡。

　　Three models are available in the OM-LGR-5320 Series. The OM-LGR-5325 features up to ±10V analog inputs, 100 kS/s sampling, four conventional counter inputs (non-quadrature), and singlechannel trigger modes. The OM-LGR-5327 features up to ±30V analog inputs, 200 kS/s sampling, four quadrature encoder inputs, and multi-channel trigger modes. The OM-LGR-5329 includes all the functionality of the OM-LGR-5327 plus isolated digital inputs.

　　Analog Input

　　16SE/8DE analog inputs are included on each data logger. The OM-LGR-5325 features multiple analog input gain ranges up to ±10V. The OM-LGR-5327 and OM-LGR-5329 add a ±30V analog input range for increased measurement capability. Each data logger provides 16-bit resolution.

　　Correlated, High-Speed Sampling

　　The OM-LGR-5327 and OM-LGR-5329 can sample input data at up to 200 kS/s while the OM-LGR-5325 offers a 100 kS/s sample rate. Each module can sample all analog, digital, and counter data synchronously, making it easy to compare time between all channels.

　　Configuration, Data Storage, and Retrieval

　　Each data logger can be configured through the SD memory card or via the on-board USB port. Simply configure the logging session with the included DAQLog software. All logging parameters are captured on the SD memory card. A 4 GB SD memory card is included with each data logger. Memory cards up to 32 GB are supported for extended data collection. Data is retrieved by removing the SD memory card from the logger and uploading to a PC or by connecting to the USB port on the logger.

　　Triggering

　　OM-LGR-5320 Series data loggers offer multiple triggering options for starting and stopping a data scan. These options vary by model. The OM-LGR-5325 features single-channel analog and digital triggering. The OM-LGR-5327 and OM-LGR-5329 offer multi-channel and pattern triggering options. Multiple trigger options allow collection of only the desired data. External clocking is also supported.

　　Digital I/O

　　16 digital inputs are included with each data logger. These inputs can be sampled synchronously with analog input data. The OM-LGR-5325 and OM-LGR-5327 feature up to 28V digital inputs while the OM-LGR-5329 features up to 30V digital inputs. The digital inputs on the OM-LGR-5329 also provide 500 Vdc isolation. Each data logger also features one digital output relay channel. The Form C relay can be programmed via the included DAQLog software to alarm when desired conditions are met.

　　Counters

　　Four counter inputs are built into the OM-LGR-5320 Series. The OM-LGR-5325 features conventional up/down counters. The OM-LGR-5327 and OM-LGR-5329 include quadrature and conventional counter inputs. Multiple count modes are also supported.

　　Pushbutton Logging Controls

　　Onboard one touch logging controls are featured on each module for quick and simple operation. These controls can be used for a variety of functions including:

　　Configuration loading from SD memory card

　　Start/stop logging

　　Force trigger/user event

　　Device reset

　　Control of status LEDs

　　LEDs on each module provide instant logging and trigger status and activity state.

　　DAQLog Software

　　DAQLog Software is an easy to use application included with each OM-LGR-5320 Series data logger. DAQLog uses a spreadsheet style interface that allows simple setup of channel and logging parameters. DAQLog includes the following functions:

　　Data logger configuration

　　Channel setup

　　Trigger setup

　　Data conversion

　　Scan rate and acquisition length

　　Trigger, event, and alarm parameters

　　Data can be saved in .csv format for easy import into Excel?.

　　Specifications

　　ANALOG INPUT

　　A/D Converter: 16-bit successive approximation type

　　Input Ranges: Software selectable per channel;

　　OM-LGR-5325: ±10V, ±5V, ±1V;

　　OM-LGR-5327, OM-LGR-5329: ±30V, ±10V, ±5V, ±1V

　　Number of Channels: 8 differential/16 single-ended, software configurable

　　Input Configuration: Multiplexed

　　Absolute Max Input Voltage:

　　OM-LGR-5325: CH_x to AGND, ±25V max (power ON/OFF);

　　OM-LGR-5327, OM-LGR-5329: CH_x to AGND, ±38V max (power ON/OFF)

　　Input Impedance

　　OM-LGR-5325: ±10V, ±5V, ±1V range, 10 GΩ (power ON), 1 kΩ (power OFF)

　　OM-LGR-5327, OM-LGR-5329: ±30V range, 1 MΩ (power ON), 1 GΩ (power OFF);

　　±10V, ±5V, ±1V range, 10 GΩ (power ON), 1 GΩ (power OFF)

　　Input Leakage Current: ±100 pA

　　Input Capacitance: ±30V range, 90 pf; ±10V, ±5V, ±1V range, 55 pf

　　Max Working Voltage (Signal+ Common Mode):

　　±30V range, ±30.05V;±10V, ±5V, ±1V range, ±10.2V

　　Common Mode Rejection Ratio:

　　fin = 60 Hz, ±30V range, 65 dB min; fin = 60 Hz, all other ranges, 75 dB min

　　Crosstalk: DC to 25 kHz, adjacent differential mode channels, -80 dB

　　ADC Resolution: 16-bits

　　Input Bandwidth (-3 dB): All input ranges, 450 kHz min

　　Input Coupling: DC

　　Max Sample Rate:

　　OM-LGR-5325: 100 kHz;

　　OM-LGR-5327, OM-LGR-5329: 200 kHz

　　A/D Pacing Sources: See input sequencer section

　　Warm Up Time: 30 minutes, min

　　Absolute Accuracy: All ranges, 0.07% FSR

　　Noise: Differential mode, 2 LSB rms

　　ANALOG INPUT CALIBRATION

　　Calibration Method: Factory calibration

　　Calibration Interval: 1 year

　　TRIGGERING

　　Mode External Digital via DTRIG (Pin 76):

　　Software configurable for rising or falling edge

　　External Analog via ATRIG (Pin 78):

　　See external analog trigger

　　Multi-Channel Analog

　　(OM-LGR-5327, OM-LGR-5329): Level-sensitive based on acquired data.

　　Up to 16-channels may be used as independent trigger sources.

　　Digital Pattern Trigger

　　(OM-LGR-5327, OM-LGR-5329):

　　Trigger when a user-defined 1 to 16 bit digital pattern is matched

　　on the DIN0-DIN15 pins. Programmable mask bits.

　　External Digital Trigger Latency Non-Pretrigger Acquisition:

　　100 ns typical, 1 μs max

　　Pretrigger Acquisition: 1 scan period max

　　External Trigger Pulse Width: 1 μs min

　　Internal Trigger Latency:2* (1/per-channel sample rate)

　　EXTERNAL ANALOG TRIGGER

　　External Analog Trigger Source:

　　ATRIG input (pin 78)

　　Analog Trigger Input Ranges:

　　OM-LGR-5325: ±10V;

　　OM-LGR-5327, OM-LGR-5329: ±30 V, ±10V, software selectable

　　Absolute Maximum Input Voltage

　　OM-LGR-5325: ATRIG_IN to AGND, ±25V max (power ON/OFF);

　　OM-LGR-5327, OM-LGR-5329: ATRIG_IN to AGND, ±38V max (power ON/OFF)

　　Input Impedance

　　OM-LGR-5325: ±10V range, 10 GΩ (power ON), 1 kΩ (power OFF);

　　OM-LGR-5327, OM-LGR-5329:

　　±30V range, 1 MΩ (power ON), 1 GΩ (power OFF);

　　±10V range, 10 GΩ (power ON), 1 GΩ (power OFF)

　　Trigger Modes: Configurable for positive or negative slope, level

　　Trigger/Hysteresis Resolution: 12 bits, 1 in 4096

　　Trigger/Hysteresis Levels: ±10V/4096 or ±30V/4096, software selectable

　　Trigger/Hysteresis Accuracy: ±2% of reading, ±50 mV offset

　　Latency: 1.5 μS

　　Full Power Bandwidth (-3 dB): 1 MHz

　　DIGITAL INPUT

　　Number of Inputs: 16-channels

　　OM-LGR-5325

　　Input Type: TTL

　　Input Voltage Range: 0 to 28V

　　Input Characteristics: 47 kΩ pull-down resistor, 39.2 kΩ series resistor

　　Max Input Voltage Level: 0 to +32V (power ON/OFF)

　　Min High Level Input Voltage Threshold: 2.0V max

　　Max Low Level Input Voltage Threshold: 0.8V min

　　OM-LGR-5327

　　Input Type: TTL

　　Input Voltage Range: 0 to 28V

　　Input Characteristics: 47 kΩ pull-down resistor, 39.2 kΩ series resistor

　　Max Input Voltage Level: 0 to 32V (power ON/OFF)

　　Min High Level Input Voltage Threshold: 2.0V max

　　Max Low Level Input Voltage Threshold: 0.8V min

　　Event Logging: Change of state, pattern recognition;

　　event time stamped using real time clock

　　OM-LGR-5329

　　Input Type: Industrial

　　Input Voltage Range: 0 to 30V

　　Input Characteristics: Resistor divider 39.2 kΩ series resistor

　　and 10 kΩ shunt resistor connected to IGND

　　Max Input Voltage Level: 36V (power ON/OFF)

　　Min High Level Input Voltage Threshold: 10.04V max

　　Max Low Level Input Voltage Threshold: 3.85V min

　　Event Logging: Change of state, pattern recognition;

　　event time stamped using real time clock

　　Isolation: 500 Vdc min

　　DIGITAL OUTPUT

　　Number of Outputs: 1

　　Type: Mechanical relay, NEC ED2/EF2 series

　　Relay Configuration: 1 Form C

　　Relay Contact Resistance: 0.075 Ω

　　Relay Contact Operate Time: 3 mS (excluding bounce)

　　Relay Contact Release Time: 2 ms (excluding bounce)

　　Relay Insulation Resistance: 1000 MΩ at 500 Vdc

　　Relay Contact Ratings Max Switching Voltage: 220 Vdc/250 Vac

　　Max Switching Current: 1.0 A

　　Max Carrying Current: 2.0 A

　　COUNTERS

　　OM-LGR-5325

　　Counter Type: Conventional

　　Number of Channels: 4

　　Inputs: Counter, Up/Down, Gate

　　Resolution: Fixed 32-bit or as sized by the modulo register

　　Count Modes: Up/down, period/frequency, Modulo n

　　De-Bounce Times (Programmable): 16 steps from 500 ns to 25 ms;

　　positive or negative edge sensitive; glitch detect mode or de-bounce mode

　　Time-Base Accuracy: 50 ppm

　　Input Voltage Range: 0 to 5.5V

　　Input Type: TTL

　　Input Characteristics: 49.9 kΩ pull-down resistor

　　Max Input Voltage Range: -0.5V to 7.0V

　　Input High Voltage: 2.0V

　　Input Low Voltage: 0.8V

　　OM-LGR-5327, OM-LGR-5329

　　Counter Type: Quadrature and conventional (x1, x2, x4)

　　Number of Channels: 4

　　Inputs: Phase A+/A-, Phase B+/B-, Index ±

　　Resolution: Fixed 32-bit or as sized by the modulo register

　　Count Modes: Quadrature, up/down, period/frequency, Modulo n

　　De-Bounce Times (Programmable): 16 steps from 500 ns to 25 ms;

　　positive or negative edge sensitive; glitch detect mode or de-bounce mode

　　Time-Base Accuracy: 50 ppm

　　Receiver Type: Quad differential receiver

　　Configuration: Each channel consists of Phase A input, Phase B input and Index input;

　　each input switch selectable as single-ended or differential

　　Differential: Phase A, Phase B and Index (+) inputs at user connector routed to (+) inputs

　　of differential receiver. Phase A, Phase B and Index (-) inputs at user connector routed to

　　(-) inputs of differential receiver.

　　Single-Ended: Phase A, Phase B and Index (+) inputs at user connector routed to (+) inputs of differential receiver. Phase A, Phase B and Index (-) inputs at user connector routed to ground.

　　(-) Inputs of differential receiver routed to +3V reference.

　　Common Mode Input Voltage Range: ±12V max

　　Differential Input Voltage Range: ±12V max

　　Input Sensitivity: ±200 mV

　　Input Hysteresis: 50 mV typ

　　Input Impedance: 12 kΩ min

　　Absolute Maximum Input Voltage: Differential, ±14V max

　　SOFTWARE

　　Operating System: Windows XP SP2/VISTA and 7 (32-bit and 64-bit)

　　POWER

　　External Power Supply: 9V min, 30V max

　　ENVIRONMENTAL

　　Operating Temperature Range: 0 to 55°C (32 to 131°F)

　　Storage Temperature Range: -40 to 85°C (-40 to 185°F)

　　Humidity: 0 to 90% RH non-condensing

　　MECHANICAL

　　Dimensions: 241 x 127 x 44.5 mm H (9.5 x 5.0 x 1.75")

　　Weight: 0.52 kg (1.15 lb)

　　SHOCK AND VIBRATION SPECIFICATIONS

　　Mechanical Shock

　　Operating: 50 g, 3 msec half sine; 30 g, 11 msec half sine; 3 hits per face for a total of 18 hits

　　(18 hits at 50 g, 18 hits at 30 g)

　　Standard: IEC 60068-2-27

　　RANDOM VIBRATION

　　Frequency Hz: 10-500

　　Vibration Level: 5 grms

　　Test Time: 100 minutes/axis

　　Standard: IEC 60068-2-64

　　产品型号 产品描述

　　OM-LGR-5325 Stand-alone high speed 100 kS/s multi-function data logger

　　OM-LGR-5327 Stand-alone high speed 200 kS/s multi-function data logger

　　OM-LGR-5329 Stand-alone high speed 200 kS/s multi-function data logger with isolated digital inputs

　　OM-LGR-5300-ADAP Spare 100/240 Vac 50/60 Hz ac adaptor (USA Plug)

　　OM-LGR-5327数据记录器 美国omega

　　OM-LGR-5327数据记录器 美国omega衍生阅读:上千元，所以随着科技的发展，有纸记录仪逐渐的被无纸记录仪给取代，但是由于某些特殊场合，必须要实时打印，才存在着一些市场。其中温度无纸记录仪有可分为：RX200温度无纸记录仪，RX200B温度无纸记录仪，RX4000B温度无纸记录仪，RX6000B温度无纸记录仪，RX8000温度无纸记录仪，无源压力记录仪，其中这些记录仪又有彩色记录仪和单色蓝屏无纸记录仪；有纸记录仪分为R1000温度有纸记录仪，便携式有纸记录仪。国内记录仪的快速发展，更多的用户都选择了国产记录仪！ 主要特点 画面信息丰富，可同时显示数据、曲线、棒图等； 棒图无纸记录仪 棒图无纸记录仪 多12路输入，可接收热电偶、热电阻、电流和电压等多种输入信号； 多4路模拟量变送输出通道，有(0~10)mA、(4~20)mA和(0~20)mA等3种输出信号供选择； 多12路报警输出，常闭常开触点可选； 多3路24V配电输出； 大容量FLASH历史数据存储； ； 可根据需要选择中/英文操作界面； CF卡转存历史数据和报

　　OM-LGR-5327数据记录器 美国omega 相关产品