OM-DAQXL-ADAPTOR-SN美国OMEGA

OM-DAQXL-ADAPTOR-SN美国OMEGA

价格 面议
起订量 10㎡
货源所属商家已经过真实性核验
品牌 Omega/欧米伽
型号 OM-DAQXL-ADAPTOR-SN
关键字
在线咨询 立即下单 留言询价 电话咨询
深圳市鑫博恒业科技有限公司
通过真实性核验手机验证
主营:
美国omega热电偶

进入店铺全部产品

店内推荐

联系我们

联系人:赵先华

邮箱:235521054@qq.com

电话:13823144468

地址: 广东深圳市深圳市福田区华强北路华强广场A栋17A

产品详情

  OM-DAQXL-ADAPTOR-SN美国OMEGA

  OM-DAQXL-ADAPTOR-SN

  

  数据采集 ? ? OM-DAQXL Series

  8 or 16 Channel Universal Input Touch Screen Data Loggers

  7" Touch Screen TFT Display

  8 (OM-DAQXL-1) or 16 (OM-DAQXL-2) Analog Channel Inputs

  8 or 16 Virtual (Math) Channels

  8 Digital I/O (4 Inputs, 4 Outputs)

  Measures Voltage, Current, Thermocouples, RTDs, Thermistors, Strain Gage, Frequency and Pulse

  24-Bit Analog Input Resolution

  Fast Sampling Rate–125 Samples/Sec (1 Channel)

  4 Alarm Outputs

  Large Data Storage: 1 GB Internal Memory, 32 GB SD Card or 32 GB USB Drive

  USB Device (PC Communication) and USB Host (USB Drive, Mouse, etc.)

  Powers from Rechargeable Lithium-Ion Battery and/or AC Adaptor

  Protective Rubber Boot - Comes with Hard carrying case

  Benchtop or Wall Mount Enclosure Design

  产品描述

  OM-DAQXL is an 8 or 16 channel analog input portable data logger with a 7 inch resistive touch color display. All inputs are programmable and can be configured for millivolts, volts, milliamps, thermocouple, RTD, thermistor, strain gauge, or frequency. All the menus, ions, and configurations can be done from the display touch screen. The unit also has 4 digital inputs, 4 digital outputs, 4 alarm outputs, one USB host port and one USB device port. The unit also has 3 LEDs for different indications (Power, Alarm and Logging).

  The OM-DAQXL comes complete with protective rubber boot, rechargeable lithium ion battery, 32 GB SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6') USB cable, 1.8 m (6') digital I/O cable, alarm/excitation terminal block, universal AC adaptor, screwdriver, quick start guide, set of 5 PTFE insulated Type K thermocouples, set of 5 ferrites to install on the thermocouple inputs (for noise reduction) and crimp-on ground lug. The unit can be wall mounted using the provided keyhole mount or operated on a bench using the tilt stand.

  Home Screen

  The home screen is the main screen of the data logger’s user interface. It is divided into 3 distinct sections as shown on the PDF.

  Digital Display View

  Status/Information Display: This status bar provides information such as Battery Charge percentage, System Clock (displays current Time amp; Date), Lock/Unlock data logger, status of the 4 Alarm Outputs, and Logging Mode indication.

  Data Display Area: This is the area where different inputs (up to 4 Channels) are displayed vs. time. The data is displayed in 4 different ways: Waveform, Waveform amp; Table, Table only, and Digital. In the Digital view, each channel name and number are displayed along with the value.

  Navigation Toolbar: This toolbar provides access to all the functions and menus of the data logger. You can extend or retract the toolbar by pressing the Tool but. The following flow chart shows all the functionalities of the buts of the toolbar.

  Standalone Operation

  The OM-DAQXL’s touch screen user interface (UI) makes configuring the data logger for operation straight forward and simple. Recorded data files can easily be reviewed and analyzed on the OM-DAQXL. For data analysis on a computer, simply transfer the data file from the SD card or USB thumb drive to the PC and open the ed data file into Excel? or other data analysis software.

  SPECIFICATIONS

  Screen: 7 inch, TFT, resistive touch comes with plastic stylus

  Rubber Boot: Black

  Analog Input Type: Thermocouple, thermistor, RTD, strain gauge, DC voltage, DC current

  Thermocouple Types: J, K, T, E, R, S, B, C, N

  Thermocouple Accuracy:

  Type J or K: ±(0.15% of rdg + 1.1°C)

  Type T, E or N: ±(0.15% of rdg + 1.7°C)

  Type R, S, B or C: ±(0.15% of rdg + 2.0°C)

  RTD Types: Pt100, Pt500, Pt1000 (0.00385 or 0.00392 curve); 2, 3 or 4-wire

  RTD Accuracy: ±(0.25% of rdg + 1°C)

  Thermistor Types: 2252Ω/10KΩ

  Thermistor Accuracy: ±1.0°C

  DC Voltage Input Ranges: ±50 mV, ±100 mV, ±1V, ±5V, ±10V, ±20V, ±50V

  DC Current Input Range: ±20 mA

  DC Voltage/Current Accuracy: ±0.1% of FS

  Strain Gauge Type: 100Ω full bridge, 350Ω full bridge

  Strain Gauge Excitation: 5V, 10V

  Digital Input Type: Pulse/Frequency

  Frequency/Pulse Input: 0 to 250 KHz

  Frequency Accuracy: ±2 Hz

  Sampling Rate: 125 s/sec (Max) to 1 s/hour (Min)

  Maximum Sampling Rate per Number of Channels (Analog and Digital):

  1 Channel: 125 s/sec

  2 Channels: 50 s/sec

  4 Channels: 25 s/sec

  8 Channels: 10 s/sec

  16 Channels: 5 s/sec

  Logging Rate: 125 s/sec (Max) to 1 s/hour (Min)

  Maximum Logging Rate per Number of Channels (Analog and Digital):

  1 Channel: 125 s/sec

  2 Channels: 50 s/sec

  4 Channels: 25 s/sec

  8 Channels: 10 s/sec

  16 Channels: 5 s/sec

  Excitation to Power External Transmitter: 24 Vdc @ 50 mA output–set in data session setting

  Filter Options: Per channel able moving average filter: None, 2, 5, 10, 20 or 100 samples

  Number of Samples for Moving Average Filter per Channel: Up to 50 samples

  Math (Virtual) Channels: 8 or 16

  Digital Inputs: 4 Schmitt trigger based inputs

  Range: 0 to 24 Vdc single-ended

  Logic High Threshold: 2.5V

  Logic Low Threshold: 1.5V

  Digital Outputs: 4 channels, open collector, 5V @ 50 mA

  Alarm Output: 4, Open collector, 30V @ 500 mA

  Alarms per Channel: Two

  Alarm Types: High, low, windows in, windows out, open sensor

  Alarm Latching: Settable in alarm menu

  On Alarm Event: Map to 4 alarm outputs, take screen shot, sound buzzer

  Logging Conditions: On command or based on trigger conditions

  Start and Stop Trigger Conditions: Timer, date and time, weekday and time, alarm output, external trigger

  Memory:

  Internal: 1 GB

  SD Card: 32 GB

  USB Drive: 32 GB

  USB Ports: One host and one device

  Battery: Rechargeable lithium-ion; 7.2V @ 4.8 Ah

  Battery Life: 4 to 8 hours based on display setting

  DC Adaptor: 12 Vdc @ 5A

  Operating Environment: 0 to 50°C (32 to 122°F), 0 to 95%RH non-condensing

  General Dimensions: 28.6 L x 15.24 H x 6.35 cm D (9 x 6 x 2.5")

  Weight: 1.13 kg (2.5 lbs)

  产品编号 产品描述

  OM-DAQXL-1-NA-CAL-38-channel touch screen data logger with USB communications and CAL-3 NIST calibration certificate for type K thermocouple input, deg C (see Note 2 below To Order table)

  OM-DAQXL-2-NA-CAL-316-channel touch screen data logger with USB communications and CAL-3 NIST calibration certificate for type K thermocouple input, deg C (see Note 2 below To Order table)

  OM-DAQXL-1-NA-CAL-48-channel touch screen data logger with USB communications and CAL-4 NIST calibration certificate for user-specified input type and units (see Note 2 below To Order table)

  OM-DAQXL-2-NA-CAL-416-channel touch screen data logger with USB communications and CAL-4 NIST calibration certificate for user-specified input type and units (see Note 2 below To Order table)

  OM-DAQXL-1-SEA8-channel touch screen data logger with USB communications

  OM-DAQXL-2-SEA16-channel touch screen data logger with USB communications

  Accessories

  OM-DAQXL-RBSpare rubber boot

  SD32GBSpare 32 GB SD card

  OM-DAQXL-USBSpare USB cable, 1.8 m (6')

  OM-DAQXL-CABLE6Spare digital I/O cable, 1.8 m (6')

  OM-DAQXL-TB8Spare alarm/excitation terminal block

  5TC-TT-K-20-36Spare set of 5 Type K thermocouples with stripped leads

  PT-USB-1Spare 1 GB thumb drive

  OM-DAQXL-RFSpare ferrite for thermocouple input

  OM-DAQXL-ADAPTOR-SEASpare 12 Vdc, 5A power adaptor for Singapore

  OM-DAQXL-BATTERYSpare rechargeable battery pack

  OM-DAQXL-STYLUSSpare stylus

  注: (1) The OM-DAQXL comes complete with protective rubber boot, rechargeable lithium ion battery, 32 GB SD card, one plastic stylus, 1 GB USB thumb drive, 1.8 m (6') USB cable, 1.8 m (6') digital I/O cable, alarm/excitation terminal block, universal AC adaptor,

售后服务

商家电话:
13823144468