DP2000-B1 美国OMEGA

　　DP2000-B1 美国OMEGA-调节器

　　DP2000-B1

　　直流电压表、电流计指示器/控制器

　　1/8 DIN

　　DP2000-AB Series

　　5年保修 CE

　　直流电压表、电流计指示器/控制器

　　1/8 DIN

　　DP2000-AB Series:直流电压表、电流计指示器/控制器lt;brgt;1/8 DIN

　　DP2000-A4

　　±1999 or ±9999 Count Display Span

　　±200 mV to ±200V or ±100 mV to ±100V Ranges

　　±20 μA to ±2 A or ±10 μA to ±1 A Ranges

　　1 or 0.1 mV/Count Analog Output

　　Front-Panel Accessible Adjustments

　　LED or LCD Display

　　Automatic Polarity

　　Display Hold and Test

　　Screw-Terminal Barrier Strip

　　The DP2000/9000A and DP2000/9000B are a high-quality ±1999 or ±9999 count DC voltmeter and ammeter, respectively. The base meters are digital indicators for use in electrically-noisy industrial environments. With the addition of analog and control outputs, these meters can provide two-wire currentloop signals to a central control room and provide local alarm or control. A 1/8 DIN case with screw terminals for signal and power is standard. A wide range of options are available.

　　Power and Display Options

　　Six types of power supplies are available: 120 Vac, 240 Vac, 24 Vac, 5 Vdc, isolated 9 to 32 Vdc and isolated 26 to 56 Vdc. An LED display is standard, an LCD display is optional and is recommended for viewing in bright ambient light. A NEMA 4 (IP65) splash-proof lens cover is available.

　　Signal input and power connections are made via a rear barrier terminal strip. The motherboard rear edge connector provides access to hold and test, polarity, clock, and the standard analog output and optional analog outputs. Decimal point positions can be ed by jumpers.

　　Analog Output Options

　　A 1 mV/count (±2V full-scale) or 0.1 mV/count (±1V fullscale) analog output is standard and is ideal for driving a strip-chart recorder. An additional analog output can be provided by an optional vertical plug-in board. Available output signals are 0 to 5 Vdc, 0 to 10 Vdc, 0 to 1 mA (source or sink) and 4 to 20 mA (source or sink). The top and bottom of each output range can be scaled to fit a user-ed display span.

　　Control Output Options

　　Additional outputs can be provided by a horizontal upper board. Available options include single-setpoint control with one 10 A relay, dual-setpoint control with two 10 A relays, 4 to 20 mA proportional control (source or sink), time-proportional 2 A solid-state relay control, and isolated, parallel BCD output.

　　规格：

　　Input Configuration

　　Configuration: Bipolar, single-ended

　　Polarity: Automatic

　　Span Adjustment: ±4%

　　Conversion

　　Technique: Auto-zero, dual slope, average value

　　Signal Integration Period: 100 ms, nominal

　　Reading Rate: 2.5/s, nominal

　　Display

　　LED: Red, 14.2 mm (0.56"), 7-segment

　　LCD: 12.7 mm (0.50"), 7-segment

　　Power

　　AC Voltages: 120, 240 or 24 Vac 10%/-15%

　　AC Frequency: 49 to 440 Hz

　　DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp; 5 Vdc ±5%, non-isolated

　　Power Consumption: 8 W maximum

　　Common Mode

　　Voltage: 1500 Vp test (354 Vp per IEC spacing)

　　Rejection (DC to 60 Hz): 120 dB

　　NMR 50/60 Hz: 75 dB (DP2), 130 dB (DP9)

　　Environmental

　　Operating Temperature: 0 to 60°C (32 to 140°F)

　　Storage Temperature: -40 to 85°C (-40 to 185°F)

　　Relative Humidity: 95% at 40°C (non-condensing)

　　Mechanical

　　Bezel: 96 W x 48 H x 8 mm D (3.78 x 1.89 x 0.31")

　　Depth Behind Bezel: 139.8 mm (5.50")

　　Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")

　　Weight: 17 oz (480 g)

　　Case Material: 94V-0 UL-rated polycarbonate

　　产品型号说明

　　(1) (2) (3) (4) (5) (6)

　　DP

　　(1) Display Resolution and Case Style

　　选择

　　2 代表 ±1999 counts (3 1/2 digits)

　　9 代表 ±9999 counts (4 digits)

　　(2) Display amp; Power Options

　　选择

　　0 代表 LED 120 Vac (49/440 Hz) (BQ20 or BQ90)

　　1 代表 LCD 120 Vac (49/440 Hz) (BQ21)

　　2 代表 LED 240 Vac (49/440 Hz) (BQ22 or BQ92)

　　3 代表 LCD 240 Vac (49/440 Hz) (BQ23)

　　4 代表 LED 9-32 Vdc (isolated) (BQ24 or BQ94)

　　5 代表 LCD 9-32 Vdc (isolated) (BQ25)

　　6 代表 LED 5 Vdc** (BQ26 or BQ96)

　　7 代表 LCD 5 Vdc** (BQ27)

　　8 代表 LED 24 Vac (BQ28 or BQ98)

　　9 代表 LCD 24 Vac (BQ29)

　　A 代表 LED 26-56 Vdc (isolated) (BQ2A or BQ9A)

　　B 代表 LCD 26-56 Vdc (isolated) (BQ2B)

　　(3) Analog Outputs

　　选择

　　0 代表 1 mV/count (supplied on all units)

　　1 代表 0-5 Vdc non-isolated (BA01)

　　2 代表 0-10 Vdc non-isolated (BA01)

　　3 代表 0-1 mA source or sink non-isolated (BA01)

　　4 代表 4-20 mA source or sink non-isolated (BA01)

　　5 代表 4-20 mA sink (high-compliance) non-isolated. (BA02)

　　6 代表 4-20 mA ISOLATED (BA03)

　　(4) Control Outputs

　　选择

　　0 代表 None

　　1 代表 Dual-setpoint 10 A relay. (BDT1)

　　2 代表 Proportional 4-20 mA control source or sink (BDP1)

　　3 代表 Time-proportional solid-state 2 A relay plus proportional 4-20 mA control source or sink. (BDP2)

　　4 代表 BCD (isolated latched buffered byte addressable). Includes 50-pin mass-termination connector. (BDD2)

　　5 代表 Single-setpoint 10 A relay (BDS1)

　　(5) Input Type and Range

　　选择

　　A1 代表 DC Voltage ± 199.9 mV (DP2000) or ± 99.99 mV (DP9000)

　　A2 代表 DC Voltage ± 1.999 V (DP2000) or ± 999.9 mV (DP9000)

　　A3 代表 DC Voltage ± 19.99 V (DP2000) or ± 9.999 V (DP9000)

　　A4 代表 DC Voltage ± 199.9 V (DP2000) or ± 99.99 V (DP9000)

　　B1 代表 DC Current ± 19.99 μA (DP2000) or ± 9.999μA (DP9000)

　　B2 代表 DC Current ± 199.9 μA (DP2000) or ± 99.99μA (DP9000)

　　B3 代表 DC Current ± 1.999 mA (DP2000) or ± 999.9μA (DP9000)

　　B4 代表 DC Current ± 19.99 mA (DP2000) or ± 9.999 mA (DP9000)

　　B5 代表 DC Current ± 199.9 mA (DP2000) or ± 99.99 mA (DP9000)

　　B6 代表 DC Current ± 1.999 A (DP2000) or ± 999.9 mA (DP9000)

　　(6) Display Color

　　选择

　　Nothing(leave field blank) 代表 for Red Display (standard)

　　-G 代表 Green Display

　　DP2000-B1

　　DP2000-B1 美国OMEGA

　　DP2000-B1 美国OMEGA 新相关产品：DP461A-OVERLAY 美国OMEGA