CT6101-PV记录器CT6101-PV 美国Omega

　　The CT6100 Series microprocessorbased circular chart recorders are available in 1-, 2-, or 3-channel variants. They combine the simplicity and clarity of pen drawing with the versatility of microprocessor control. Each channel is compatible with all industry-standard sensors and signals, including thermocouple types J, K, T, E, N, R, S, and B; Pt100 platinum RTDs; and 4 or 20 mA current loops.

　　Low and high measurement ranges are provided for each input type; separate range cards are not required. Multi-input versions feature optoelectronic isolation of the input stages to eliminate troublesome installation ground loops. Multislope integrating 16-bit A/D converters ensure precise measurement by sampling the input every 0.5 seconds.

　　Thermocouple and RTD characteristics are fully linearized. The recorders use automatic cold-junction compensation for thermocouple measurement.

　　All CT6100 Series models feature alarm relays. Single-pen recorders are equipped with 3 fail-safe singlepole changeover relays; 6 relays are standard on the 2- and 3-pen versions. Color-coded LEDs indicate the status of each relay. All relay functions are user selectable: setpoint values and hysteresis levels are entered directly via the keypad, while relay action and channel assignment are selected from user-friendly menus. Circuit precision is matched by the backlash-free pen-drive mechanism, which has a positioning resolution of better than 0.1%. An integral feedback potentiometer enables closed-loop monitoring of each pen position.

　　Each recorder uses a low-maintenance stepper motor. The rotation speed of the 244 mm diameter chart is microprocessor controlled and user programmable.

　　All CT6100 recorders are housed in a strong molded case that can be panel or surface mounted. A gasket-lockable door protects internal components from harsh industrial environments and offers protection rated to NEMA 12 (IP55). A tough acrylic window lets the user view the chart trace, digital channel readings, and alarm status with the recorder's door closed.

　　SPECIFICATIONS Inputs

　　Input Types: Thermocouple K, T, J, N, E, B, R, S; Platinum RTD (Pt100) 3-wire; ±2V, +20 Vdc; ±2 mA, ±20 mA

　　Input Ranges: Thermocouples to BS4937 (type B minimum temp 200°C); RTD to BS1904:1984

　　Cold Junction Compensation: Automatic; ±0.02°C/°C stability

　　Input Resistance:

　　Thermocouple: 10 MΩ

　　±2 mA: 200 Ω

　　±20 mA: 20 Ω

　　±2V, ±20V: >1 MΩ

　　Min Span: 5°C (9°F), thermocouples K, J, T, E, N and RTD; 50°C (90°F) other thermocouple types, 50 mV, 200 mA

　　T/C BURN-OUT: Pull-up or pull-down, selectable

　　RTD Lead Resistance: 3-wire, compensated up to 10 Ω max per lead

　　Input Protection: ±50 Vdc on signal inputs

　　Input Isolation: Optoelectronic on 2 and 3 input models 500 Vrms channelto- channel, 500 Vrms channel-to-ground

　　Sensor/Transmitter Power: 12 or 24 Vdc, 25 mA, selectable; for current loop inputs

　　Performance

　　Accuracy:

　　RTD, Low Range (-200 to 200°C): ±0.2°C

　　RTD, High Range (200 to 850°C): ±0.8°C

　　Thermocouple: ±0.25% FS

　　Voltage/Current: ±0.2% FS

　　Temperature Stability: ±0.02% FS/°C

　　Linearization Accuracy:

　　T/C Types J, K, T, N, E: ±0.1°C, -50 to 200°C, ±1°C max

　　T/C Types R and S: ±0.2°C, -50 to 200°C, ±1°C max

　　T/C Type B: ±1°C max

　　RTD: ±0.1°C, -200 to 850°C

　　Calibration Shift: ±10°C user programmable to eliminate sensor errors (T/C and RTD)

　　Chart and Display

　　Chart Size: 244 mm (9.6") dia; 40, 50, 60, 70 or 80 linear divisions

　　Chart Drive: DC stepper motor

　　Chart Speeds: 1 to 24 hours in steps of one hour, 2 to 31 days in steps of 1 day

　　Writing Method: Disposable ink cartridges; pen 1-red; pen 2-green; pen 3-blue

　　Pen Positioner: DC stepper motor

　　Positioning Resolution: >0.1% FS

　　Response Time: Zero to full scale in 4.5 sec

　　Pen Lift: Powered, activated from front panel; chart fast time advance possible with pens raised

　　Display: 2 line x 20 character dot matrix liquid crystal with backlight and automatic temperature compensation; 9.6 mm (0.37") character height

　　Display Resolution: 0.1°C for temperature inputs, software programmable for voltage/current inputs

　　Alarm Display: Relay status shown by red and green front panel LEDs Relays

　　Type: SPDT; 30 Vdc or 250 Vac @ 6 A max; 150 W DC, 1660 Vac non-inductive

　　Action: Software selectable from: high alarm/low alarm/deviation alarm/control relay (high)/control relay (low); relays de-energize in alarm state; assignable to any channel

　　Hysteresis: User programmable 0.0% to 10% span

　　Snubber Network: 22 nF and 100 Ω across each contact

　　Analog Output (Option)

　　Type: 0 to 20/4 to 20 mA; assignable to any channel; range selectable within any segment of chart range

　　Resolution: 12-bit

　　Compliance: 20V approx

　　Isolation: Optoelectronic

　　Action: direct or reverse General

　　Security: 3-level software lock including password protection, internal hardware jumper lock, lockable door

　　Power: 115 or 230 Vac ±10%, switch

　　selectable, 50/60Hz: terminal block connection

　　Power Requirements: <25 W

　　Operating Ambient: 0 to 55°C (32 to 131°F), 0 to 90% RH (non condensing)

　　Case: Steel, with glass-filled polyester resin door with acrylic window

　　Protection: NEMA 12 (IP55)

　　Mounting: Panel or surface

　　Dimensions: 336 W x 396 H x 171 mm D (13.2 x 15.6 x 6.7")

　　Weight: From single pen: 7 kg (15.4 lb)

　　to three pen: 7.7 kg (17.0 lb)

　　Panel Cutout: 288 W x 356 mm H (11.3 x 14.0")

　　产品型号产品描述

　　CT6101 1-pen recorder with 3 relays and transmitter PS

　　CT6102 2-pen recorder with 6 relays and transmitter PS

　　CT6103 3-pen recorder with 6 relays and transmitter PS

　　选配件

　　CT6100-RED Red pens, pack of 3

　　CT6100-GREEN Green pens, pack of 3

　　CT6100-BLUE Blue pens, pack of 3

　　CT6100-0-100/24H 100 chart papers, 24 hours

　　CT6100-0-100/31D 100 chart papers, 31 days

　　CT6101-PV

　　CT6101-PV记录器CT6101-PV 美国Omega

　　CT6101-PV记录器CT6101-PV 美国Omega 新相关产品：CT-485-PS记录笔 Omega记录器CT-485-PS记录笔

售后服务