GE通用电气 IC693ACC400 燃机卡件

　　我们公司主营进口工控备件，大部分工控备件我们都能帮您从国外调货，由于型号品种繁多，未能一一上传实物图！

　　本站所有产品均为特殊产品，市场价格一直波动，具体价格情况以客服报价为准。如您需要的型号在本店搜索不到，欢迎随时咨询。

　　GE通用电气 IC693ACC400 燃机卡件

　　GE通用电气 IC693ACC400 燃机卡件

　　IC693ACC319 数控系统 有关以太网网络接口单元的信息，请参考VersaMax系统 以太网网络通信用户手册(GFK-1860)。 设备网牛 DeviceNet网络接口单元(IC200DBI001)是一个DeviceNet从模块。 DeviceNet支持多种通信结构，包括点对点、多主机和具有广播功能的主/从机。*多可连接64个节点 到DeviceNet网络，无需桥接或路由。 有关DeviceNet网络接口单元的信息，请参考VersaMax 系统DeviceNet网络通信用户手册(GFK-1533)。 现场总线牛 Profibus网络接口单元(IC200PBI001)作为Profibus-DP上的从设备运行 网络，自动与主设备交换I/O、状态、控制和诊断数据 设备。NIU能够处理多达375字节的I/O数据，包括多达244 字节的离散和模拟输入数据，以及高达244字节的离散和模拟输出 数据。系统主机可以是任何能够作为总线主控操作的设备。

　　IC693ACC319 数控系统 742输有关Profibus-DP网络接口单元的信息，请参考VersaMax 系统Profibus网络模块用户手册(GFK-1534，版本A或更高版本)。 天才牛 Genius网络接口单元(IC200GBI001)作为Genius总线上的设备运行。 NIU能够处理高达128字节的离散和模拟输入数据以及128 字节的离散和模拟输出数据。

　　我司是一家从事品牌（DCS系统）（机器人系统）（大型伺服控制系统）模块 备件销售,公司产品内容为分布式控制系统(DCS) ,可编程序控制器(PLC)，ABB、AB、 本特利，英维思，伍德沃德，福克斯波罗、西屋、瑞恩、施耐德康、摩托、GE发那科、安川、博世力士乐，ACSO，力士乐等各的DCS系统配件，机器人系统配件，大型伺服系统备件。

　　PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出模块，冗余模块，电源模块，继电器输出模块。

　　The Series 90-70 is a family of programmable logic controllers (PLCs) for GE's Intelligent Platform, of which the RX3i is a part of its PACSystems family.

　　Key features of the Series 90-70 PLC include:

　　Compact, single-slot CPU modules with two main processors, an Intel microprocessor for handling analog or special function control, and a Boolean coprocessor for performing high-speed switching control, with floating-point capability on some models.

　　The standard VMEbus architecture system rack allows the installation of over 300 third-party VME standard modules.

　　Large I/O capacity of up to 12,288 switching points and 8,192 analog points.

　　CPU memory expandable from 32K bytes to 6M bytes.

　　High-density (32-point) AC or DC I/O modules, and simple module clamps prevent incorrect installation of I/O modules.

　　Standard hardware response to switching or analog interrupt inputs, handling 64 event interrupts and 16 time interrupts.

　　Convenient system and module self-diagnostics for easy troubleshooting.

　　Battery-backed internal calendar and clock in the CPU module.

　　Genius Distributed I/O Module Subsystem, FieldControl System, and VersaMax configurations for dual-bus system redundancy, fully synchronized CPU hot-standby redundancy for special applications, and even ESD Dualization and Triplex GMR system configurations for ESD (Emergency Stop Systems).

　　With the powerful programming and configuration software LogicMaster, the structured programming method, in addition to the general ladder logic programming, can also be used in C, SFC, StateLogic and other programming capabilities.

　　PACSystems RX3i series features:

　　Features a 1.0GHz Intel microprocessor and 64MB of user memory with patented fast throughput rates without message bottlenecks for simpler control without multiple controllers.

　　A wide selection of I/O modules including Ethernet, Genius, Profibus and serial communications.

　　Adopts a general-purpose PCI bus backplane with a high-speed PCI bus speed of 27MHz, enabling greater data throughput for complex I/Os and faster serial bus read/write for simple I/Os. Supports high-density discrete I/Os, general-purpose analog (TC, RTD, strain gage, voltage-current grouping per channel) I/Os, isolated analog I/Os, high-density analog I/Os, and high-speed counters, Motion control modules optimize system performance and investment, and the backplane bus supports a powered plug-and-play function to reduce system downtime.

　　Upgrading from the Series 90-70 to the RX3i offers certain advantages. For example, GE's PAC3i series offers superior performance and a smaller installation size. For some users of Series 90-70 products, there may be a shortage of spare parts because the series has been discontinued and some modules are no longer available for service. The upgrade solution, such as the use of conversion racks, can be upgraded from the original 90-70 I/O to RX3i I/O, which is much easier to install in the field, can greatly reduce the control system rewiring construction time, minimize the time of stopping the car and the workload of on-site engineering, and minimize the economic losses caused by stopping the car for renovation. At the same time, the upgraded control system supports the Profinet protocol, which has stronger real-time performance and higher network throughput, and its transmission rate is much higher than that of the earlier Genius protocol.

　　相关参数：

　　IC695CHS012 12槽机架

　　IC695CMU310冗余CPU模块，300MHz，10MB程序内存

　　IC695ETM001以太网通讯模块（1对用来同步，1对用来连接远程I/O,1对用来连接上位）

　　IC695CHS016 16槽机架，PCI总线

　　IC695NKT001以太网远程I/O扩展模块包（含1个IC695NIU001，1个IC695ETM001）

　　IC695PBM300 Profibus主模块

　　IC695CMM002串口通讯模块

　　IC695LRE001扩展模块

　　IC694PWR330电源模块,240VAC输入

　　IC694CHS392 10槽机架

　　IC694MDL660 32点,24VDC开关量输入模块

　　IC694MDL754 32点,24VDC开关量输入模块

　　IC694ALG223 16通道电流输入模块

　　IC694ALG392 8通道电流/电压输出模块

　　IC694TBB032高密度端子条

　　IC693CBL301扩展电缆，2米

　　IC694ACC310空槽模块

　　IC693ACC307终端电阻

　　CPU模块主控单元

　　IC695CPU310

　　IC695CPU320

　　IC695CMU310

　　机架

　　IC695CHS012 RX3i BASE 12 SLOTS

　　IC695CHS016 RX3i BASE 16 SLOTS

　　IC694CHS392 Base Expansion 10 Slots

　　IC694CHS398 Base Expansion 5 Slots

　　电源模块

　　IC695PSA040 RX3I电源模块120/240VAC and 125VDC 40 watts occupies two slots on system

　　IC695PSD040电源模块24VDC 40 watts occupies one slot on system base

　　产品特点：

　　统一的开发环境实现快速启动和运行

　　支持多种通信协议

　　内存达64MB

　　一个扩展同步热备份冗余控制平台

　　应用行业：

　　核电、钢铁、电力

　　[免责声明]

　　我们销售新产品和停产产品，独立渠道购买此类特色产品。贵州源妙自动化设备有限公司不是本网站特色产品的授权商、经销商或代表。本网站上使用的所有产品名称、产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目，并不表示与任何权利持有人有任何关联或授权。

　　GE通用电气 IC693ACC337 模拟电压输入模块