RED670 智能微机保护装置 GE/通用电气

　　RED670 智能微机保护装置 GE/通用电气

　　RED670 智能微机保护装置 GE/通用电气

　　RED670 界面, 可支持 +5V 及 +3.3V PCI bus 插槽

　　Card ID 功能，可让用户设定卡片的辅助识别号码，以区别多张同型号的板卡

　　16个光耦合数字输入信道

　　16个开集极数字输出信道

　　可承受3750 VDC隔离电压

　　16个数字输入信道

　　16个数字输出信道

　　兼容于PISO-730的软件

　　用户可以直接套用PISO-730 系列的产品

　　DO Readback功能

　　支持.NET 程序

　　提供 Microsoft Visual C#.NET 2005 范例程序

　　提供 Microsoft Visual 2005 范例程序

　　提供 Turbo C++, Borland C++, Microsoft C++ 范例程序

　　提供 Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic及LabVIEW范例程序

　　支持 Windows 7

　　支持 Windows 98/NT/2000/XP/2003/Vista/2008

　　支持 32/64-bit Windows

　　D/I可内部供电

　　仪表技术参数：

　　准确度：测量控制周期：0.2，测量精度：优于±0.2%FS

　　测量分辩率：1/6000，14位A/D转换器

　　报警输出：10种报警方式，通过设定选择。延时报警功能

　　继电器输出：触点容量220VAC，3A

　　OC门输出（订货时注明）：电压小于30V，电流小于50MA

　　变送输出：光电隔离4-20MA，0-10MA，0-20MA直流电流输出，通过设定选择，负载能力大于600

　　1V-5V，0-5V，0-10V直流电压输出，需订货时注明

　　输出分辨力：1/4000，误差小于±0.2%FS

　　电 源：220VAC供电的仪表：220V±10%，功耗小于7VA

　　24VDC供电的仪表：24V±10%，功耗小于5VA

　　12VDC供电的仪表：9V-20V，功耗小于5VA

　　工作环境：温度0－50℃，湿度低于90%RH，宽温范围的仪表需要在订货时注明

　　显示范围：-1999－9999，小数点位置可设定

　　显示颜色：测量值绿色，设定值红色，光柱红色，或按定货要求

　　显示分辨力：1/10式旋转

　　RED670 Interface, supporting + 5V and + 3.3V PCI bus slots

　　The card ID function allows the user to set the auxiliary identification number of the card to distinguish multiple boards of the same model

　　16 optically coupled digital input channels

　　16 open collector digital output channels

　　It can withstand 3750 VDC isolation voltage

　　16 digital input channels

　　16 digital output channels

　　Software compatible with piso-730

　　Users can directly apply piso-730 series products

　　Do readback function

　　support. Net program

　　Provide Microsoft Visual C # Net 2005 sample program

　　Provides Microsoft Visual Basic Net 2005 sample program

　　Provide Turbo C + +, Borland C + +, Microsoft C + + sample programs

　　Provide visual c + +, Borland Delphi, Borland C + + Builder, visual basic and LabVIEW sample programs

　　Support for Windows 7

　　Support Windows 98 / NT / 2000 / XP / 2003 / Vista / 2008

　　Support 32 / 64 bit windows

　　D / I can supply power internally

　　Technical parameters of instrument:

　　Accuracy: measurement control cycle: 0.2, measurement accuracy: better than ± 0.2% FS

　　Measurement resolution: 1 / 6000, 14 bit a / D converter

　　Alarm output: 10 alarm modes, which can be selected by setting. Delay alarm function

　　Relay output: contact capacity 220VAC, 3A

　　OC gate output (indicated when ordering): the voltage is less than 30V and the current is less than 50mA

　　Transmission output: photoelectric isolation 4-20mA, 0-10mA, 0-20mA DC current output. Through setting and selection, the load capacity is greater than 600

　　1v-5v, 0-5V, 0-10V DC voltage output, which shall be indicated when ordering

　　Output resolution: 1 / 4000, error less than ± 0.2% FS

　　Power supply: instrument powered by 220VAC: 220V ± 10%, power consumption less than 7VA

　　Instrument powered by 24VDC: 24V ± 10%, power consumption less than 5VA

　　Instruments powered by 12VDC: 9v-20v, power consumption less than 5VA

　　Working environment: the temperature is 0-50 ℃, the humidity is lower than 90% RH, and the instruments with wide temperature range need to be indicated when ordering

　　Display range: - 1999-9999, decimal point position can be set

　　Display color: measured value green, set value red, light column red, or according to the order requirements

　　Display resolution: 1 / 10 absolute rotation