CP405-A0 1SAP500405R0001 ABB 电源模块

　　CP405-A0 1SAP500405R0001 ABB 电源模块

　　CP405-A0 1SAP500405R0001 ABB 电源模块

　　产品介绍

　　产品型号名称：CP405-A0

　　配置网络摄像头的IP

　　● 拥有独立IP，本例中将网络摄像头的IP设置

　　4、配置

　　● 登陆的配置界面。

　　使用交叉网线连接与电脑，并为通电。在浏览器地址栏中输入（出厂默认网关地址），并输入默认用户名root，登陆的配置界面。

　　● 配置DDNS

　　DDNS（Dynamic Domain Name Server）是动态域名服务的缩写，它将用户的动态IP地址映射到一个固定的域名解析服务上。

　　EVDO拨号获取的IP为动态IP（每次重新拨号后IP可能会改变），为了方便从互连网上访问到，需要使用DDNS，即无论IP如何变化，通过固定的域名都会访问到。

　　内嵌动态域名服务机构金万维的客户端，用户可以申请免费域名，再将申请时注册的帐户名和密码配置在中即可。

　　本例中在金万维申请了动态域名“”,点击MR-900配置界面左侧“DDNS服务”，在

　　● 设置DMZ主机

　　点击配置界面左侧“转发规则”->“DMZ主机”，在右侧输入的IP（本例中为192.168.1.20），单击“保存”。

　　● 重新启动

　　点击左侧“重新启动”，上述配置即会生效。

　　5、查看监控内容

　　● 使用网线连接与，并为两台设备加电

　　● 在电脑中打开Web浏览器，在地址栏内输入所申请的动态域,即可查看到监控内容

　　Product introduction

　　Product model name:CP405-A0

　　Configure IP for webcam

　　● it has an independent IP. In this example, the IP of the webcam is set

　　4. Disposition

　　● login configuration interface.

　　Use a cross network cable to connect to the computer and power it up. Enter (factory default gateway address) in the browser address bar, and enter the default user name root to log in to the configuration interface.

　　● configure DDNS

　　DDNS (dynamic domain name server) is the abbreviation of dynamic domain name service. It maps the user's dynamic IP address to a fixed domain name resolution service.

　　The IP obtained by EVDO dialing is dynamic IP (the IP may change after each redial). In order to facilitate access from the Internet, DDNS needs to be used, that is, no matter how the IP changes, it will be accessed through a fixed domain name.

　　Embedded with the client of jinwanwei, a dynamic domain name service organization, users can apply for a free domain name, and then configure the account name and password registered at the time of application in.

　　In this example, jinwanwei has applied for the dynamic domain name "etungtest. Gnway. Net", click "DDNS service" on the left side of mr-900 configuration interface, and click

　　● set DMZ host

　　Click "forwarding rules" - > "DMZ host" on the left of the configuration interface, enter the IP on the right (192.168.1.20 in this example), and click "save".

　　● restart

　　Click "restart" on the left, and the above configuration will take effect.

　　5. View monitoring content

　　● use network cable to connect with and power up the two equipment

　　● open the web browser in the computer and enter the applied dynamic field in the address bar to view the monitoring content