变电所无线测温在线监测系统

　　变电所无线测温在线监测系统In high-voltage substations, due to aging of equipment and excessively high temperature of joint of transmission line, fire or explosion and other accidents are often caused. The traditional manual temperature measurement is not only labor-intensive, but also prone to the phenomenon of missed measurement and false alarm, which can not realize the protection of high voltage substation. Therefore, this paper introduces wireless communication technology into the temperature measurement of high voltage substation, analyzes the wireless temperature measurement early warning system, and tries to provide feasible suggestions for it. Key words: Substation; Wireless temperature measurement; Early warning system; Design research

　　产品简介

　　功能：

　　ARTM-Pn无线测温装置:ARTM-Pn无线测温装置可以单独安装在高压柜、低压抽屉柜内，每台装置可以接收18个传感器的数据，传感器型号可选配ATE100、ATE200、ATE300。装置带有一路485接口，可将采集到的温度数据上传到监控中心。

　　ARTM8温度巡检仪:ARTM系列温度巡检测控仪适用于一路或多路温度的测量和控制，主要应用于火电厂、水电站等场合的温度巡检测量及控制。测量8通道Pt100温度，也可以屏蔽其中任意通道。每一通道温度测量对应2段报警，继电器输出可以任意设置报警方向及报警值。

　　无线测温集中采集触摸屏:无线测温触摸屏可以嵌入式安装在高压柜、低压抽屉柜内，每台装置可以接收240个传感器的数据，可与ATE100、ATE200、ATE300三种传感器选配使用。装置带有一路485接口、可选配一路以太网口，可将采集到的温度数据上传到监控中心。

　　应用范围：

　　适用于高低压开关柜内电缆接头、断路器触头、刀闸开关、高压电缆中间头、干式变压器、低压大电流等设备的温度监测。

　　订货范例：

　　技术要求：1面高压柜内断路器触头6点、母排3点无源无线测温

　　辅助电源：AC/DC 220V

　　显示方式：单独无线温度显示

　　综上所述，确定型号为：无线测温装置：ARTM-P9-300,1台;无线测温传感器：ATE300,9个

　　订货范例：

　　技术要求：10面高压柜内断路器触头6点、母排3点无线测温

　　无线传感器要求：电池供电、无线

　　显示方式：集中无线温度显示

　　综上所述，确定型号为:无线测温集中触摸屏：AARTM-7062HT-4(HI),1台；无线测温传感器：ATE200,90个；无线测温收发器：ATC200,10个

　　订货范例：

　　技术要求：10面高压柜内断路器触头6点、母排3点无线测温

　　无线传感器要求：无源无线

　　显示方式：集中无线温度显示

　　综上所述，确定型号为：无线测温集中触摸屏：ARTM-7062HT-4(HI),1台；无线测温传感器：ATE300,90个；无线测温收发器：ATC400,1个；电源模块：ARTM-KDYA-DG30-24K，1个。

　　技术指标

　　产品功能

　　外形尺寸

　　产品报价

　　In order to reduce the installation difficulty and improve the universality of the temperature measuring system, a wireless temperature measuring system is designed. The temperature measuring system consists of a master temperature collecting unit and a slave temperature sensing unit. The master temperature collecting unit communicates with the slave temperature sensing unit through radio frequency (RF) wireless mode. This paper introduces the overall scheme design, hardware design, software design and shape structure design of the system. The system is easy to install, can adapt to different equipment, and has the characteristics of low power consumption, easy maintenance. Key words: temperature measurement system; Low power consumption; RF wireless module

　　变电所无线测温在线监测系统