数字地震记录器,地震记录仪适合地震监测

数字地震记录器,地震记录仪适合地震监测

价格 86,000.00
起订量 10㎡
货源所属商家已经过真实性核验
品牌 辅光仪器
型号 FPZET-048-C-VER.3
关键字
在线咨询 立即下单 留言询价 电话咨询
辅光精密仪器(上海)有限公司
通过真实性核验手机验证
主营:
激光粒度仪器-光学成像仪器 - 医用光学仪器

进入店铺全部产品

店内推荐

联系我们

联系人:陈经理

邮箱:info@f-lab.cn

电话:13820163359

地址: 上海浦东新区上海自由贸易试验区德堡路38号2幢楼三层

产品详情

  数字地震记录器ZET 048-C-VER.3可实现独立模式或在自动地震监测模式的地震和地震学研究、陆上和海上工程、海底和冰上,利用折射波、反射波和深水地震测深等方法对人工和天然震源、地震转换波法以及岩土工程勘察进行研究。

  ZETLAB SEISMO软件与ZET 048-C地震记录系统一起提供,可以使用各种算法对信号进行综合分析,并以二维和三维格式显示结果。

Measuring channels specifications
Direction of measuring axes Measuring axis Z is orthogonal to the base and directed from the base to the top, and the and Y axes are parallel to the base
Nominal operating frequency range for measuring axes , Y, Z: 0,033 – 50 Hz
Nominal sensitivity 2000 V/(m/s)
The limits of permissible relative error of measurement along measuring axes , Y, Z, up to ±10 %
Maximum measured value 5 mm/sec
Integrated noise in the operating frequency range, max. 80 nm/sec
Relative transverse penetration factor at 20 Hz, max. 1 %
Sampling frequency for channels 50, 100, 250, 500, 1000, 2500 Hz
Monitoring the status of primary transducer

  

Integrated system of electrical excitation of sensing elements (, Y, Z axes) using the actuator Axis Z
Power supply monitoring of primary transducer yes
Standalone mode
Standalone operation, min. 10 hrs
Full charge time of internal battery 18 hrs
Battery type Lead
Internal non-volatile memory 32 Gb
Time of recording to internal memory card at 500 Hz sampling frequency Over 1000 hrs
Synchronization parameters
Synchronization type GPS or PTP (IEEE1588)
Clock accuracy 0,1 ppm
General specifications
Power supply voltage 9…18 V
Power consumption 4 W
Data interface Ethernet and USB 1.1 Full Speed
Recorded data format ANA/ANP

  conversion to CSV and SEG-Y format by means of ZETLAB SEISMO Software

  

Dust and moisture protection class IP68
MTBF 10 000 hrs
Average service life 10 years
Weight (without panel), max. 6,5 kg
Dimensions (without panel), max. base diameter: 170 mm

  height: 350 mm

  

Operating temperature range ?20…+60 °C (offline product version)

  ?40…+60 °C (stationary product version)

  

售后服务

商家电话:
13820163359