联系人：陈经理
邮箱：info@f-lab.cn
电话：13820163359
地址： 上海浦东新区上海自由贸易试验区德堡路38号2幢楼三层
| 品牌 |
辅光仪器 |
型号 |
FPZET-017-U32 |
| 货号 |
FPZET-017-U32 |
材质 |
铝合金 |
| 工作温度 |
12 |
额定电压 |
12 |
| 脉冲频率 |
120 |
重量 |
1 |
| 加工定制 |
是 |
是否进口 |
是 |
| 产地 |
北京 |
|
这款多通道频谱分析仪017-U32可并行操作多个程序,多个信号分析,频谱分析仪配套各种软件和硬件,组成整套系统用于振动,声学,力学诊断,测试设备控制,支持用户研发成多任务硬件系统,适合测试,处理和监控应用。
多通道频谱分析仪017-U32可独立使用,也可用于自动控制系统中,用于科研和工业控制。与我们配套的控制软件联合使用后可具有如下功能:
实时信号分析,分析先前记录的信号
基于并行数字滤波器的倍频程和1/3倍频程分析
窄带频谱分析
AC/DC电压测量
电子信号频率测量
正弦信号和直流信号的产生
信号记录(信号的数字化值保存在设备的存储器中)
声振频谱分析仪ZET-038特点
大动态范围
记录和处理多通道数据
PTP同步
兼容ICP(IEPE),DeltaTron,ISOTRON传感器,
电隔离发电机
通道参数的可视化诊断
一键启动信号记录
多通道频谱分析仪017-U32规格参数
| Technical specifications | |
|---|---|
| Analog input (ADC) | |
| Number of analog inputs (voltage and ICP) | 32 |
| ADC resolution | 24 |
| Frequency ranges of the simultaneously analyzed signals | DC…2, DC…20, DC…200, DC…2 000, DC…20 000 Hz |
| Maximal sampling frequency | 400 kHz |
| Antialiasing signals filtration | up to 40 kHz |
| LPF filters are implemented as Butterworth filters 120 dB/oct for the following sampling frequencies: | 50 Hz, 500 Hz, 5 kHz, 50 kHz |
| Filters with frequency correction in compliance with IEC 61672-1:2002 | А, В, С, D for 1-st class precision noise meters |
| Max. input voltage (amplification ratio=1) | ±10 V |
| Programmable amplification ratios | 1, 10, 100 |
| Analog output (DAC) | |
| Number of analog outputs | 4 |
| Frequency range of the generated sinusoidal signal | 0,03… 20 000 Hz |
| Output resistance | 50 Ohm |
| Max. output current | 20 mA |
| DAC digit number | 16 |
| Max. output voltage value | ±10 V |
| Digital input/output | |
| Digital input | 8 bit |
| Digital output | 8 bit |
| Digital input/output logic type | TTL |
| Metrological specifications | |
| Analog input (ADC) | |
| Dynamic range | 110 dB |
| Channels non-linearity in the pass-band | 0,1 % |
| Cross-channel phase difference | 1° per 10 kHz |
| Intrinsic noise level of the entire pass-band at maximal amplification ratio applied to the input | 1 μV |
| Analog output (DAC) | |
| Limit of relative admissible error of frequency for the range of 10… 20 000 Hz | ±0,1 % |
| Limit of relative admissible error of frequency for the range of 0,03…10 Hz | ±10 % |
| Limits of admissible error of output DC and AC | ±(0,2 % + 2 mV) |
| Harmonic ratio of the generated sinusoidal signal | 0,1 % |
| Operational specifications | |
| Dimensions | 280 × 160 × 300 mm |
| Weight | 3,2 kg |
| Consumed power of a single module | max. 500 VA |
| Types of supported transducers | ICP (IEPE), DeltaTron, ISOTRON |
| Possibility of synchronization with other FFT Spectrum analyzers | yes |
| Non-volatile memory volume (flash-drive)* | up to 32 Gb |
| Sampling frequency of data recording to the flash-drive by a channel* | 50 kHz |
| Duration of data recording to the flash-drive by all the channels at maximal sampling frequency* | 10,8 hrs |
| Data rate via HighSpeed USB 2.0 | 480 Mbps |
| Data rate via Ethernet | 100 Mbps |
13820163359