联系人:林人杰
邮箱:fawkes021@163.com
电话:13681812199
地址: 上海金山区上海市金山工业区亭卫公路6495弄168号5幢(时兴园区)
| 型号 |
进口卫生级柔性叶片泵 |
压力 |
4 bar |
| 加工定制 |
否 |
材质 |
不锈钢 |
| 产地 |
美国 |
厂家 |
RETZ |
品牌:RETZ瑞茨/我们一直致力于流体控制领域的持续创新,始于2005……进口卫生级柔性叶片泵具有出色自吸性能的容积泵,其自吸能力可达到5米。输送粘性的产品时效率几乎达到抽水的效果,因而其用途非常广泛,抽吸处理非常平稳柔和,决不会搅打和损伤产品,即使像高脂肪乳脂那样脆弱的产品。大的浆果,即使有半个桃子大小都可以毫无损伤地通过泵,而且该泵运行完全无脉动。通过调节泵的转速,它还可以用作定量配料泵retzThe imported sanitary grade flexible vane pump is a positive displacement pumpwith excellent self priming performance, and its self priming capacity canreach 5 meters. When conveying viscous products, the efficiency almost reachesthe effect of pumping water, so its use is very wide. The pumping treatment isvery smooth and gentle, and it will never stir or damage the product, evenfragile products like high fat milk fat. Large berries, even half the size of apeach, can pass through the pump without damage, and the pump operatescompletely without pulsation. By adjusting the pump speed, it can also be usedas a quantitative batching pump
进口卫生级柔性叶片泵工作原理Operatingprinciple
1. 由于泵体定子内表面的偏心构造,在进口处,当体积增大时柔性叶轮的叶片间形成局部真空。由此形成的吸力将液体吸入泵腔中。Atpump inlet, due to the inner eccentricstructure of pump stator, partialvacuumbetween the blades of flexible impellerwill be formed when volume isincreased. The consequently formedsuction will draw liquid into pumpchamber.
2.旋转的叶轮将液体从进口送到出口。在循环的这一阶段中,叶片间的空间实际上保持恒定。叶片之问的问隙允许体积大的固体颗粒能通过泵而对液体又毫无损伤。
Therotating impeller was carried theiquid from inlet to outlet. At this stage,thespace between blades actually waskept constant. The gap between bladesallowsbig solid particles to passthrough the pump and without damage
onliquid.
3.叶片与泵体定子偏心内表面的平坦部分接触,当叶轮弯曲时,叶片间的容积减少,就将液体连续地、均衡地从泵中排出。Theimpeller is contacted with the flatpart of the eccentric inner surface inpumpstator. When impeller is bent, thevolume between blades will bedecreased, sothe liquid will be discharged continuously and evenlyfrom the pump

进口卫生级柔性叶片泵选型参数
流量范围(Maxflow):20m3/h
压力范围 (Max pressure) : 4 bar
吸程范围 (Max suction): 6 M
温度范围 (Max Temperature): 80℃
转速(Rotatingspeed:):1450R.P.M
材质(Material):316L/1.4404
表面处理(Surface treatment):Ra≤0.6μm;EP=Ra0.4μm
