联系人:林人杰
邮箱:fawkes021@163.com
电话:13681812199
地址: 上海金山区上海市金山工业区亭卫公路6495弄168号5幢(时兴园区)
| 型号 |
进口卫生级气动截止阀 |
材质 |
不锈钢 |
| 驱动方式 |
气动 |
压力环境 |
常压 |
| 适用介质 |
水 气体 液体 油品 汽 |
外形 |
大型 |
| 流动方向 |
单向 |
规格 |
DN4-DN100 |
| 产品别名 |
进口无菌气动调节截止阀 |
工作温度 |
常温 |
| 产地 |
美国 |
厂家 |
RETZ |
品牌:RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新,始于2005……进口卫生级气动截止阀主要应用在流量切断或调节控制阀,与介质接触的部位只有不锈钢和PTFE,也可真空环境下使用。阀体根据无死角设计,表面粗糙度可达Ra0.4μm,阀芯密封采用嵌入式设计,因此使用非常的广泛几乎可以涵盖了所有的行业,如制药、食品与饮料、酿酒、化工等工业领域。Sanitary grade pneumatic shut-off valves aremainly used in flow shut-off or regulating control valves, with only stainlesssteel and PTFE in contact with the medium, and can also be used in vacuumenvironments. The valve body is designed with no dead corners, and the surfaceroughness can reach Ra0.4 μ m. The valve core seal adopts embeddeddesign, so it is widely used and can cover almost all industries, such aspharmaceuticals, food and beverage, brewing, chemical and other industrialfields
选型参数
规格:1/4"-4",DN4-DN100
材质:316L/1.4404,ASME BPE 316L 1.4435 NB2 Fe≤0.5%
压力:真空~10bar(1.0 MPa)
温度:-20℃到+150℃,取决密封于材质
密封:PTFE/TFM/PEEK
连接标准:DIN SMS ISO IDF RJT BS4825 ASME BPE 3ADIN11864 DIN11853
连接方式:螺纹、卡箍、焊接、法兰
驱动方式:手动、气动、电动
光洁度:Ra≤0.6μm;MP=Ra≤0.3μm;EP=Ra≤0.3μm
操作方式
1.气动开关:塑料和不锈钢执行器
2.阀门ding位器
0/4...20mA到0...5/10V(基本型)
0/4...20mA位置反馈输出(选项)
Device NET总线协议控制(选项)
支持单键自整定功能
防护 IP67等级
电源 DC 24V ±10%
支持手动和自动操作
3.控制单元
电源:DC 24V±10%
单作用(标准)、双作用(选项)
自整定阀位功能反馈
支持模拟信号(4-20mA)&电信号(DC24V)输出
支持AS-I BUS总线
支持手动和自动操作
典型应用--
卫生级气动截止阀被广泛应用于印织、印染、漂白、食品、洗涤、化工、水处理、医药等各种自动机械设备,具有抗水锤、无噪声、密封性能可靠等特点Sterile shut-off valves are widely used in various automatic mechanicalequipment such as printing and weaving, printing and dyeing, bleaching, food,washing, chemical engineering, water treatment, medicine, etc. They have thecharacteristics of water hammer resistance, no noise, and reliable sealingperformance