进口卫生级高性能离心泵 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……进口卫生级高性能离心泵是一款全不锈钢设计的离心泵，包含电机也是不锈钢，它不仅优化了内部结构、叶轮设计、死角处理、机封压力平衡设计且机封完全被处在冲洗区域。我们还对泵外部卫生也进行了优化，使其内部洁净卫生、外部减少死角，由于没有死角区域，它非常容易被CIP清洗、SIP杀菌等。另外我们对泵保持了最灵活性组合应用，如，泵出口角度可以从0°-360°之间任意调整，泵盖采用卡箍式连接，这样对泵维护和保养及机封的更换，保持了高效，降低了人员高度性的要求，而这些无需特殊的工具。因完成而达到了、高效、卫生、高可靠性及低成本的目的retzThe imported sanitary grade high-performance centrifugal pump is a centrifugalpump designed entirely of stainless steel, including the motor which is alsostainless steel. It not only optimizes the internal structure, impeller design,dead angle treatment, mechanical seal pressure balance design, but also themechanical seal is completely in the flushing area. We have also optimized theexternal hygiene of the pump to ensure absolute internal hygiene and reducedead spots on the outside. As there are no dead spots, it is very easy to becleaned by CIP, sterilized by SIP, etc. In addition, we have maintained maximumflexibility in the combination of pump applications, such as the pump outlet anglebeing adjustable from 0 ° to 360 °, and the pump cover being connected withclamps. This ensures efficient pump maintenance and replacement of mechanicalseals, reducing the need for highly specialized personnel without the need forspecial tools. Achieved the goals of high efficiency, hygiene, highreliability, and low cost due to completion

　　泵进出口的接连方式

　　液体在管道中会有能量的损失，分为沿程损失和局部阻力损失,管内越光滑,沿程损失越小,弯道越少，管径变化越小，局部阻力损失越小,因而尽量不要采用粗糙的管道连接，也不要在连接中用管道急变的方式连接

　　进口卫生级高性能离心泵进口卫生级高性能离心泵

　　流量范围flow ：1m3/h-120m3/h

　　扬程范围 lift：70 M

　　温度范围Temperature : -20到140℃

　　材质material quality：SUS304,SUS316L(在材料的选用上泵体，泵盖，叶轮等凡与物料接触之零件由SUS316L或SUS304不锈钢制造)

　　表面处理Surface Treatment：≤Ra0.8μm，≤Ra0.6μm，≤Ra0.4μm

　　机封: 单机封、双机封 Machine seal: single machine seal,double machine seal

　　进/出口连接 ： 螺纹、卡箍、法兰、无菌法兰 Inlet/outlet connections: threads, clamps, flanges,sterile flanges