进口塑料背压阀 UPVC CPVC背压阀 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……

　　进口塑料背压阀安装于计量泵或隔膜泵的正压排放管路上，防止虹吸现象的发生，消除由于投加点压力波动造成的投加量变化，从而保证泵的投加精度 Theimported plastic back pressure valve is installed on the positive pressuredischarge pipeline of the metering pump or diaphragm pump to prevent theoccurrence of siphoning, eliminate the change in dosage caused by pressurefluctuations at the dosing point, and ensure the dosing accuracy of the pump

　　规格Specification:1/2~2-1/2

　　适用温度Temperature：≤80℃

　　设定背压范围Setback pressure range：0.03~0.6Mpa

　　材质Materia：UPVC、PP、CPVC、PVDF

　　连接方式：粘接、热熔焊接、丝扣、法兰；隔膜材质：PTFE+橡胶复合 Connectionmethod: bonding, hot melt welding, screw thread, flange; Diaphragm material:PTFE+rubber composite

　　进口塑料背压阀性能特点Performance characteristics

　　在现场取下调整螺丝上的保护帽，旋转调整螺丝，借助管路中的压力表可调至所需压力，可通过调节螺丝在0-0.6Mpa范围内设置背压。和脉冲阻尼器配合使用减少水锤对系统的损坏，保持泵的出水口到背压阀有一定的恒压，保持系统流速均恒。

　　Removethe protective cap from the adjustment screw on site, rotate the adjustmentscrew, and use the pressure gauge in the pipeline to adjust to the requiredpressure. The back pressure can be set within the range of 0-0.6Mpa byadjusting the screw. Working in conjunction with pulse dampers to reduce waterhammer damage to the system, maintaining a constant pressure from the pumpoutlet to the back pressure valve, and maintaining a constant flow rate in thesystem.

　　释放管路压力，保证系统压力稳定Release pipeline pressure to ensure stable system pressure

　　保护泵的安全和系统的正常运行Protect the safety of the pump and the normal operation of the system

　　与脉冲阻尼器配合使用减小水锤对系统的危害，达到优越的低振动调节效果Combined with pulse dampers to reduce the harm of water hammer to the systemand achieve superior low vibration regulation effect

　　减小流速波动的峰值，保护管路系统不受压力波动的冲击Reduce the peak value of flow rate fluctuations and protect the pipeline systemfrom pressure fluctuations

　　隔膜采用先进的PTFE+橡胶复合工艺，几乎适用于所有腐蚀性流体，密封可靠无泄漏 Thediaphragm adopts advanced PTFE+rubber composite technology, which is almostsuitable for all corrosive fluids, with reliable sealing and no leakage

　　RETZ的PVC阀门可以满足工控系统的截断、安全、防腐、排放的控制产品涵盖了：进口PVC隔膜阀、蝶阀、球阀、安全阀、背压阀、阻尼器、电磁阀、水力控制阀。

　　RETZ'sPVC valves can meet the requirements of cutoff, safety, anti-corrosion, andemission control in industrial control systems. The products include importedPVC diaphragm valves, butterfly valves, ball valves, safety valves, backpressure valves, dampers, solenoid valves, and hydraulic control valves.

　　典型应用-

　　UPVC阀门适用场合--

　　自来水工程，工业废水排送管，化学酸碱腐蚀介质输送管，建筑给水用管，灌溉、喷灌工程，海水养殖用管，污水处理工程，盐化水输送管，煤矿灌浆用管，电力、通信穿线管，泳池循环用水管。

　　CPVC阀门适用场合--

　　工业及流夜系统：金属处理，电镀厂，制药厂及炼油厂酸碱夜的输送。化工厂、纺织厂、制革厂的漂白、染色、工业废水，酸碱管道。矿厂、冶金厂及化肥厂的残渣与矿浆管道。半导体制造厂的消电离子水流处理系统。

　　纸浆及造纸：铝及苛性碱管道、 氯及氯碱厂内管道

　　水处理：加氯管道,沉淀池及过滤管道,回收水处理管道