进口双转子流量计 美国RETZ瑞茨

　　品牌：RETZ瑞茨/我们一直致力于流体控制和测控领域的持续创新，始于2005……

　　进口双转子流量计产品用途Product use

　　转子流量计采用一对螺旋转子是计量腔体内仅有的运动体，起到分割、测算、运送和排泄被测液体的作用，在结构上增加了定位齿轮，使两只转子间在转动时达到彼此互不接触，可以允许被测液体中的微细颗粒通过，从而不易卡表 进口双转子流量计2.jpg

　　Therotameter uses a pair of spiral rotors, which are the only moving bodies in themetering chamber, and play a role in dividing, measuring, transporting, anddischarging the measured liquid. A positioning gear is added to the structureto ensure that the two rotors do not contact each other during rotation, allowingfine particles in the measured liquid to pass through, making it difficult tojam the meter

　　适用于稀油、轻质油、稠油、含砂量大、含水量大的，被测量液体的粘度范围大 It issuitable for thin oil, light oil, heavy oil, crude oil with large sand contentand water content, and the viscosity range of the measured liquid is wide.

　　主要特点 Mainfeatures

　　通过的液体流量大，较大流量是同通径普通容积表的二倍左右 Theflow rate of liquid passing through is large, and the larger flow rate is abouttwice that of a common volumetric meter with the same diameter

　　使用寿命长，准确度高，可靠性强 Longservice life, high accuracy, and strong reliability

　　压内损失极小Minimal internal pressure loss

　　有线远传较长距离为1000米，脉冲信号输出N=0.1L（一个脉冲为1N），可直接与计算机联网 Wired remotetransmission with a long distance of 1000 meters, pulse signal output N=0.1L(one pulse is 1N), and can be directly connected to the computer network

　　本安防爆la llCT4（本质安全型）；防护 IP65Intrinsically safe explosion-proof la ll CT4 (intrinsically safe); ProtectionIP65

　　进口双转子流量计产品技术参数 Technical parameter

　　公称通径(mm) 8~300

　　准确度 0.1、0.2、0.5级

　　压力损失 0~1000mpas<80kpa

　　工作压力 1.6、2.5、4.0、6.3、10、16、20、42MPa

　　温度范围 -20℃~+80℃、 -20℃~+150℃

　　介质粘度 0.1~1000mpa.s

　　环境条件 温度-30℃~+70℃、湿度5%~95%、气压86Kpa~106Kpa

　　连接法兰 国标，另可按用户提供法兰标准制造

　　防爆等级 Exd II CT4