联系人:林人杰
邮箱:fawkes021@163.com
电话:13681812199
地址: 上海金山区上海市金山工业区亭卫公路6495弄168号5幢(时兴园区)
| 型号 |
进口气囊式脉冲阻尼器 |
材质 |
塑料 |
| 连接形式 |
法兰 |
压力环境 |
常压 |
| 适用介质 |
水 液体 气体 |
流动方向 |
单向 |
| 工作温度 |
常温 |
密封形式 |
软密封型 |
| 加工定制 |
否 |
规格 |
1/2~2" |
| 产地 |
美国 |
厂家 |
RETZ |
品牌:RETZ瑞茨/我们一直致力于流体控制领域的持续创新,始于2005……
进口气囊式脉冲阻尼器能够平滑由计量泵、隔膜泵等容积型泵引起的管路脉动和系统的水锤现象。它由耐腐蚀的隔膜将气体与管路中的液体隔离,通过气室容积的变化平滑管路脉动 Theimported airbag pulse damper can smooth the pipeline pulsation and system waterhammer caused by volumetric pumps such as metering pumps and diaphragm pumps.It is separated from the liquid in the pipeline by a corrosion-resistantdiaphragm, and the pulsation of the pipeline is smoothed by changes in thevolume of the gas chamber.
气囊式阻尼器的容积选型Volume selection of airbag dampers
即用计量泵(或隔膜泵)每一次冲程的计量能力(m)乘以12就可以得出减少90%脉冲所需要的阻尼器最小容积 The minimumvolume of the damper required to reduce 90% pulse can be obtained bymultiplying the metering capacity (m) of each stroke of the metering pump (ordiaphragm pump) by 12
规格Specification:1/2~2"
适用温度Temperature:≤80℃
压力范围PressureRange:1.6MPa
材质Materia:UPVC、PP、PVDF、SUS304、SUS316L
连接方式Connectionmethod:由令承插、丝扣、法兰 Byconnecting sockets, threads, flanges
隔膜材质Diaphragmmaterial:PTFE复合、FPM(氟橡胶)、EPDM(三元乙丙)、NBR(丁腈)

进口气囊式脉冲阻尼器工作原理operationalprinciple
根据玻义耳定律P:V=P.V,气体的体积与气体的压强成反比,通过改变气体的体积来平滑管路脉动。对于流速有正弦曲线性的系统作用,波峰时:气室体积变小,脉冲阻尼器吸收多余的流量液体;波谷时:气室体积变大,释放存储的液体,从而达到平滑脉动的效果。
Accordingto Boyle's law P:V=P.V, the volume of the gas is inversely proportional to thepressure of the gas, and the pipe pulse is smoothed by changing the volume ofthe gas. For the system with sinusoidal curve, at the peak, the chamber volumebecomes smaller, the pulse damper absorbs the excess flow fluid; at the trough,the volume of the chamber becomes larger, so as to achieve the effect of smoothpulsation.
进口气囊式脉冲阻尼器功能特点Functionalcharacteristics
减小水锤对系统的危害。减小流速波动的峰值。保护管路、阀门、接头不受压力波动的冲击。为计量泵创造良好的工作环境并改善泵的工作性能。允许系统使用更小的管径,降低成本。 和背压阀等配合使用可以使管路的压力波动接近为零。降低系统的能耗。
Reducethe harm of water hammer to the system. Reduce the peak value of flow ratefluctuations. Protect pipelines, valves, and joints from pressure fluctuations.Create a good working environment for metering pumps and improve theirperformance. Allow the system to use smaller pipe diameters to reduce costs.When used in conjunction with backpressure valves, the pressure fluctuation inthe pipeline can be close to zero. Reduce the energy consumption of the system
